Home Companies Haida Equipment Co., Ltd

Programmable Hot And Cold Shock Test Chamber, Environmental Test Chamber

Contact Us

[China]

Trade Verify

Address: Room 105, Building F4, District F, Tianan Digital City, Nancheng District, Dongguan City, Guangdong Province,China

Contact name:Mak

Haida Equipment Co., Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Programmable Hot And Cold Shock Test Chamber, Environmental Test Chamber

Country/Region	china
City & Province	dongguan guangdong
Categories	Switching Power Supply

Product Details

Programmable Hot And Cold Shock Test Chamber, Environmental Test Chamber

Product Introduction:

Hot And Cold Shock Test Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, it is widely used in metal, plastic, rubber, electronics and other materials and it can be used as an important reference for improving product quality. It meets the standard of MTL, IEC, JIS, GJB and so on .

Features

To simulate test environment with different temperature and humidity

Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…

Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation

Uncover test unit weakness in a short-term test with accelerated time effect

Test Standard:

1,GJB150.5A-2009
2,GB/2423.22-2012/IEC 60068-2-14:2009
3,GB/T 2424.13-2002/IEC 60068-2-33:1971
4,GJB360B-2009
5,GB/T 2423.1-2008/IEC6008-2-1-2007
6,GB/T 2423.2-2008/IEC60068-2-2:2007
7,GB/T 10589-2008
8,GB/T 11158-2008

Technical Parameters

Model			HD-E703-200K40	HD-E703-200K55	HD-E703-200K65
Nominal content product(L)			200
Inside the box size(mm)			650×450×670(W×H×D)
Overall dimensions(mm)			1530×1800×1980(W×H×D)
Technical parameters	Temperature range	High temperature	RT～170 ℃
		Low temperature	－75℃ ～RT
		Test area	－40℃ ～150℃	－50℃ ～150℃	－65℃ ～150℃
	Temperature shock range	High temperature	60℃ ～150℃
		Low temperature	－10℃ ～－40℃	－10℃ ～－50℃	－10℃ ～－65℃
		Normal temperature zone	Indoor temperature
	Temperature and humidity deviation		±0.3℃,±2%R·H
	Difference in temperature and humidity		±2℃,±3%R·H
	Heating rate		2℃/min
	Cooling rate		0.5~1.2℃/min
	Cold storage time		RT→－75℃≤ 65min
	Thermal storage time		RT→170℃≤ 35min
Refrigeration system	Compressor		Imported German blog, R23 / R404A refrigerant
	Cooling way		Water or air cooling
	Condenser		Stainless steel brazed plate type heat exchanger
	Heater/evaporator		Nickel-chromium electric heater/finned evaporator
Microcomputer & display screen			TT-5188T3-7HLTaitong controller
Drive motors			Drive
Temperature and humidity sensor			Japan
Safety measures			No fuse switch, compressor overpressure, overheat, overcurrent protection, fuse, water flow protection, phase sequence protection, oil pressure protection, pressure relief protection, low pressure protection, pressure cylinder protection, temperature limit protection
Material	Chassis shell		High quality cold rolled steel sheet is sprayed with static electricity
	Inner wall of the chassis		SUS304# Stainless steel plate
	Heat preservation material		Polyurethane rigid foam + high density fiberglass cotton
Standard configuration			Test hole, floodlight, double vacuum bulletproof glass observation window
Power supply			three-phase,380V,50Hz

environmental testing chamber

Quality Control

A) Quality assurance items
The guarantee period with FOC within one year (not including nonexpendable & transport and travel fees)
During the guarantee period, Haida shall supply free maintenance or replacement for the damaged part(just for nonexpendable part) induced by non-human damage;
If any quality problems occurs within the guarantee period, and Haida must provide on-site service, the transport and travel expense shall be borne by customer;
If any big quality problems occurs out of the guarantee period, Haida will provide a maintain service, the transport and travel expense shall be borne by customer, also charge for a favorable price;
Haida will provide a lifetime favorable price to the buyer with the materials and spare parts used in system operation, equipment maintenance;

B) The main quality warranty maintenance certificate
If there is any dispute please refer to our guarantee letter, so:
1. please keep the guarantee letter, if you lost it, please connect with us in a month.
2. If the guarantee letter has been altered or it has no our stamp, it is useless.

C) The following conditions need to be paid reasonably even in the assurance period:
1. Natural reasons
2. Operating mistakes
3. Voltage is not fit for our operation instruction
4. Repack it without our guides
5. Damaged for borrowing to others
6. Damaged for authorized machine modification
7. Damaged for authorized calibration
8. Authorized transshipment mistake
9. Serve for long distance area

Company Information

Haida International Equipment Co,Ltd is a National "High-tech Enterprise"(certified in 2016),integrating R&D,manufacturing and brand marketing.Our textile testing instruments meets with the requirements of ISO, ASTM, AATCC, BS, GB, DIN, EN, JIS. We are committed to providing high quality testing instruments.We always adhered to the strict and professional concept and strictly control the quality of products, and provide our customers with high-quality testing instruments,first-class service and competitive prices.