|
[China]
Trade Verify
Address: 8-109 No.1, West Da Sha Di Road, Whampoa District, Guangzhou, China
Contact name:Ray
Guangzhou Tiangong Machinery Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
DOOSAN DX260 Swing Device DAEWOO DX260 Swing Reduciton Gearbox DX260LC Reducer Gear
| Product |
| Model:DX260 DX255LC |
| Brand: TGFQ |
| Part Number: K1004037A |
| Part Name: Excavator swing reducer gearbox without motor |
| Gearing Arrangement: Planetary |
| Process: Heat Treatment |
Product Photo:
Drawing:
| Pos. | Part No | Qty | Parts name |
| -. | K1004037A | [1] | SWING REDUCTION GEAR Komatsu China |
| ["desc: REDEUTEUR D'ORIENTATION"] | |||
| 1 | K1004038B | [1] | SHAFT Komatsu China |
| ["desc: ARBRE"] | |||
| 2 | K1002539A | [1] | CASE Komatsu China |
| ["desc: CARTER"] | |||
| 3 | K1002540A | [1] | CARRIER NO.2 Komatsu China |
| ["desc: PORTEUR"] | |||
| 4 | K1002541A | [1] | GEAR;SUN NO.2 Komatsu China |
| ["desc: PIGNON"] | |||
| 5 | K1002542 | [4] | GEAR;PLANET NO.2 Komatsu China |
| ["desc: PIGNON"] | |||
| 6 | K1002543 | [4] | PLATE;SIDE NO.2 Komatsu China |
| ["desc: PLAQUE"] | |||
| 7 | K1002544 | [4] | PIN Komatsu China |
| ["desc: GOUPILLE"] | |||
| 8 | K1002545 | [4] | BUSH Komatsu China |
| ["desc: DOUILLE"] | |||
| 9 | K1002546 | [1] | CARRIER NO.1 Komatsu China |
| ["desc: SUPPORT"] | |||
| 10 | K1004040B | [1] | GEAR;SUN NO.1 Komatsu China |
| ["desc: PIGNON"] | |||
| 11 | K1002548 | [3] | GEAR;PLANET NO.1 Komatsu China |
| ["desc: PIGNON"] | |||
| 12 | K1002549 | [3] | PLATE;SIDE Komatsu China |
| ["desc: PLAQUE"] | |||
| 13 | K1002550 | [3] | PIN Komatsu China |
| ["desc: GOUPILLE"] | |||
| 14 | K1006981 | [1] | GEAR;RING Komatsu China |
| ["desc: PIGNON"] | |||
| 15 | K1002552 | [1] | PLATE;THRUST Komatsu China |
| ["desc: PLAQUE"] | |||
| 17 | K1003384A | [4] | PIN;LOCK Komatsu China |
| ["desc: GOUPILLE"] | |||
| 18 | K1002554A | [1] | SPACER Komatsu China |
| ["desc: DOUILLE D'ECARTEMENT"] | |||
| 19 | K1004041A | [1] | COLLAR Komatsu China |
| ["desc: COLLIER"] | |||
| 20 | K1002556 | [1] | PLATE Komatsu China |
| ["desc: PLAQUE"] | |||
| 21 | K1002558 | [1] | RING;LOCK Komatsu China |
| ["desc: BAGUE"] | |||
| 22 | K1002559 | [1] | BEARING Komatsu China |
| ["desc: ROULEMENT"] | |||
| 23 | K1003682A | [1] | BEARING Komatsu China |
| ["desc: ROULEMENT"] | |||
| 24 | K1005719 | [1] | SEAL;OIL Komatsu China |
| ["desc: JOINT"] | |||
| 25 | S5741361 | [4] | PIN;SPRING Komatsu China |
| ["desc: GOUPILLE"] | |||
| 26 | 2181-1116D4 | [1] | PLUG Komatsu China |
| ["desc: BOUCHON"] | |||
| 27 | S5810010 | [3] | PLUG Komatsu China |
| ["desc: BOUCHON"] | |||
| 28 | K1004042A | [1] | GEAR;PINION Komatsu China |
| ["desc: PIGNON"] | |||
| 29 | S2226671 | [12] | BOLT;SOCKET Komatsu China |
| ["desc: BOULON A 6 PANS CREUX"] | |||
| 30 | 140-01343A | [1] | PIPE Komatsu China |
| ["desc: TUYAU"] | |||
| 31 | 119-00020 | [1] | BAR;LEVEL Komatsu China |
| ["desc: BARRE DE NIVEAU"] | |||
| 32 | K1002567 | [3] | PLATE;SIDE Komatsu China |
| ["desc: PLAQUE"] | |||
| 33 | S6500600 | [3] | RING;SNAP Komatsu China |
| ["desc: BAGUE D'ARRET"] | |||
| 34 | 2120-1363 | [4] | BOLT;SOCKET Komatsu China |
| ["desc: BOULON A 6 PANS CREUX"] | |||
| 35 | 2403-1039A | [1] | PLATE Komatsu China |
| ["desc: PLAQUE"] | |||
| 36 | 2126-9001 | [1] | WIRE Komatsu China |
| ["desc: FIL"] | |||
| 37 | K1003386 | [3] | BUSH Komatsu China |
| ["desc: DOUILLE"] | |||
| 40 | K9004901 | [1] | CARRIER NO.1 ASS'Y Komatsu China |
| ["desc: PORTEUR"] | |||
| 41 | K9004902 | [1] | CARRIER NO.2 ASS'Y Komatsu China |
| ["desc: PORTEUR"] | |||
Specifiions
1.Completely interchangeable with original
2.Very competitive price
3.Low-noise, high efficiency, high reliability, long life
4.Small size, high power density
5.Excellent oil absorption properties.
6.For engineering machinery, maritime and boat and industrial
machinery etc.
7.For open-loop Swashplate axial piston pump.
8.Continuous working pressure up to 280bar, the instantaneous
maximum working pressure up to 350bar.
9.Flow is proportional to drive speed and displacement, and can be
achieved by adjusting the swashplate angle stepless variable
10.There are constant pressure, constant-power constant pressure,
constant-voltage constant-flow and other control method, and the
control response speed
11.Drive shaft can withstand the axial and radial loads
12.For pass-axis structure, and for multi-loop system
We have more than 4000 square meters of three-dimensional warehouse
and more than 2000 square meters of outdoor warehouse
It ensures that we have sufficient inventory and respond to
customers' needs faster. Fast delivery is our advantage
FAQ:
Common problem:
Q: What can you do
A: We can provide you with digging final drive and swing drive
motors and reducer gearbox and their parts
Q: How long is the warranty period?
A: Within 6 months, we will provide you with maintenance spare
parts within the warranty period free of charge.
Q: Do you accept OEM or ODM?
A: Yes, you just need to provide your logo file or ideas.
Q: Can I order one of our samples for testing first?
A: Of course!
Q: How do I order?
A: You need to tell us the model and quantity you are interested
in, and then we will issue a proforma invoice for you. The goods
will be prepared after receiving the payment. The preparation time
depends on the content of the order
Q: Do you have a factory?
A: Yes, we have our own factory and have 22 years of production
experience in the excavated gear industry.
