GUANG ZHOU CITY FREESEA ELECTRICAL CO., LTD |
|
Submersible Fish Tank Heater with Over-Temperature Protection for Saltwater Freshwater
About This Item
1. Precise Temperature Control: An intelligent IC chip controls the
heater’s temperature, keeping the temperature difference within
±0.5℃/±1ºF; It provides living environment for your aquatic
creatures
2. Aquarium Heater:and a plastic tube material that features
explosion-proof and anti-corrosion engineering, which makes this
submersible heater more resistant to damage while heating better
than traditional glass heaters; Built with overheat and water
shortage protection
3. External Temperature Controller: The touch-button controller
adjusts the temperature without getting your hands wet; It’s easy
to control the temp from 68℉/20°C to 94℉/34°C; Check the size chart
to find your desired fish tank heater
4. Easy to Setup: The 500W submersible heater is suitable for 39 to
125 gallons aquariums; Install it vertically or horizontally and
ensure the device is fully submerged under the water
How to set temperature
1. Place the heater rod inside the aquarium and keep fully
submerged.
2. Plug in power and you can see the red light indicator on and LED
digital number display current water temperature.
3. You can press and hold the button on the controller for 2-3
seconds to switch between Fahrenheit and Celsius. Temperature
control range: 63-94℉/17℃-34℃.
4. You need to press the button on the controller again and again
to adjust the temperature until the screen displaying the temp you
desired.
5. The heater begins to heat.
Product Parameters
Compatible Devices | fish tank , aquarium tank , small pond |
Controller Type | Push Button |
Material | Polyresin |
Size | 50W(2-8 gallons) |
Special Features | Heating , Underwater , Adjustable |
Specific Uses For Product | Adjustable temperature , built-in thermometer , constant the water temperature , dual LED display , small size, easy to hide in mini tank |
Tank Volume | 8.00 gallons |
Warm Tips
1. Always keep heater rod and probe fully submersible.
2. Before take out the heater, please disconnect power and wait for
30 minutes to cooling down.
3. This heater is not for suitable for use in acrylic tank.
4. Do not bury it undergravel as gravel not conduct heat.
5. Keep the heating rod out of the reach of children.
6. The inside of the product is composed of glass and quartz sand.
If the glass is broken and the quartz sand leaks due to long-term
use or damage in the transportation diagram, turn off the power
first. Please be assured that the substance will not cause any harm
to aquatic organisms, and we will send you a new product!
Widely Use