Super Silent 12 Volt Dc Water Pump , High Pressure Brushless Water Pump

Super Silent 12 Volt Dc High Pressure Water Pump Dc Small Water Pump Motor

•  
• This pump can be used in either wet or dry installations and features wet rotor/wet bearing technology for cooler running. Pre-filter screen handles large particles require less maintenance. Designed for fresh water use only.
• Compact design is great for space-saving on your aquariums and fish tanks. Multiple size insert fitting and suction cups included.
• High performance energy-efficient pumps designed for use in Ponds, Fountains, Waterfalls, Hydroponic systems, Irrigation systems and water features.

Use And Maintenance:

In order to ensure safety, all products are strictly inspected and tested, please according to the instructions for operation in case pumps are destroyed.

1. There is inside the pump or dirt into obstacles will reduce the effect of use of the product, if the pumps, pump out dirty cleaning of dirt.

2. Clean water pump, remove the front cover and waterleaf, with little brush or water, dirt, don't move pump shaft.

If the pump does not operate, according to the following verification:

1. Check whether the circuit is damaged, for another input to ensure that the pump power;

2. Ensure that the inlet without dirt;

3. Take out the rotor to ensure that the rotor is not damaged or blocked.

Attention:

1. Please power off before use;

2. Please don't burn;

3. Do not directly use the power line to pick up the pump;

4. Do not operate in hot water;

5. Work in clear water

Description:

• Ultra Quiet & Energy Saving - With high strength ceramic shaft, it is low operating noise, strong abrasion, corrosion resistance and suitable for fresh water and salt water. Seamless movement Hydrodynamic design helps reduce power consumption
• Run-dry Protection Design - Built-in temperature control chip, when the temperature of the pump body rises to 85℉, the pump turns off automatically, but the motor restarts after the temperature drops
• Adjustable Flow Rate - With bottom suction trainer, 100% submersible. An Adjustable knob helps control the water flow rate. Max Flow Rate: 550 GPH. Max Lift Height: 6.9ft. (Length of power cord:1.4M=4.6ft)
• Safe & Durable - The pump motor is sealed with high-quality resin and has better insulation performance, which can effectively prevent Water leakage and Electric leakage. 4 strong suction cups at the bottom of the pump help keep it in place.
• Wide Application - Comes with 2 water nozzles (0.51in and 0.62in), providing different water flow effects. This submersible pump is ideal for aquarium, fountains, spout and hydroponic systems, pond, Drain Water, etc. Backed by 12-month warranty and professional after-sale service within 24hrs

1. Samrt control, dry running automaticly cut power.(Principle:Dry running opreation will increase motor temperature, then the pump will automatically shut down, but the motor will restart working after the temperature goes down. Therefore, when the motor automatically turned off we need to cut off power immediately. This function can effectively reduce the damage caused by dry running.)

2. With bottom suction trainer,100% submersible.

3. Maximum flow rate: 330GPH STRONG POWER and HIGH LIFT. Max Lift Height: 6 ft. 40W high efficiency motor for energy saving.

4. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly) SUCTION CUP and 5.9Ft POWER CORD. Long enough cord for easy installation.

5.12 month warranty