GUANG ZHOU CITY FREESEA ELECTRICAL CO., LTD |
|
Pool And Spa Equipment Silent Operation Swimming Pool Water Pump Big Flow 16.5m3
Features:
· Life: lifetime more than 25,000 hours.
· Ceramic sleeve and ceramic shaft, Low noise.
· Can work with 80℃ fluids temperature.
· Working Way: 24 hours of continuous work.
· Slipping protection etc;
· FG signal.
· EMC compatibility test passed,no harassment signal .
· stall protection.
· PWM/Manual speed control function [optional].
· Can be customized./PV /5V /FG (Solar Panel driven/ 0~5V speed control / speed signal wire )
Paramerter:
Model | Voltage | HZ | Power(KW) | Power(HP) | Hmax(m) | Qmax(m³/h) | Port Size(inch/mm) | ||
FBS-100 | 220V-380V | 50/60 | 0.75 | 1 | 7 | 16.5 | 50 1.5” | ||
FBS-150 | 220V-380V | 50/60 | 1.1 | 1.5 | 8.5 | 18.5 | 50 1.5” | ||
FBS-200 | 220V-380V | 50/60 | 1.5 | 2 | 10 | 21 | 50 1.5” | ||
FBS-300 | 220V-380V | 50/60 | 2.2 | 3 | 13 | 25 | 50 1.5” |
Working Conditions:
M edium temperature:5~50 C
Environment temperature:< 60 C2. Application :
FRE ESEA circulation&filtration pump canbe used for
aquaculture, water project, large sizeswimming pool,water park, etc.
USE AND MAINTENANCE:
1. You should make the pump working in the standard rotate speed in
use process, don't speed up at will, in order to avoid potential
safety hazard and impact the useful life of the pump.
2. Direct coupled type pump units:the chassis must remain stable,
so as not to damage the coupling.
Belt wheel type pump units:the two pulleys must be aligned, the
belt loose or tighten must be moderate. If the pump doesn't turn,
it is generally because the impeller-ring get rusty, you can use
the mallet knocking the coupling axially.Pump mounting height(in
order to suction the water tank as the base)should be less than the
permit smoking on 1-2meter high vacuum.
3. You should stop the engine if you discover abnormalities(such as
noise, shock, hydraulic discharge descend etc.),and attention the
bearing heat up, the temperature can't exceed 75°C.
If stop using for a long time, you should discharge the water in
the pump, overhaul and oil, keep it in a dry and ventilate shade.
In winter, you should discharge the water at once when you stop
using it in case frost crack.After the pump every 1000 hours
operating time, you should take down and clean the bearing, and
exchange quick-wear parts.
INSTALLATION AND APPLICATION:
These pumps are suitable for handing clean water not containing abrasive particles and fluids which are not chemically aggressive to the pump components. reliable, compact, economic and simple to use, They are particular suitable for domestic and swimming pool applications such as water supply for recirculation in air conditioners and refrigerators, industrial water uses in general, and the automatic distribution of water from surge tanks, watering gardens, lifting water from tanks or wells down to 9m depth.
These pumps should be installed in a covered area, protected
against the weather.