Plastic Mixing Machine , Used For Mixing Various Plastics
1. Working principle of vertical mixer
It uses the rapid rotation of the screw to lift the raw materials
from the bottom of the barrel from the center to the top, and then
fly them in an umbrella shape and return to the bottom, so that the
raw materials are tumbling up and down in the barrel and mixed, and
a large amount of raw materials can be uniformly mixed in a short
time. complete
Mixer features: easy to clean, made of stainless steel, easy to
clean without rust, evenly mixed, and fast mixing speed, which can
ensure the consistency of each batch of materials;
2. Advantages of vertical mixer
Cost-saving, with small investment and quick results, less land
occupation, labor saving, and high efficiency; it can be
customized; it can be customized according to the height of the
customer's workshop; the village material is optional; the heating
function can be customized.
3. Operation instructions for vertical mixer
(1) A dry run test machine should be carried out before use. Before
the test machine, the firmness of all the connections of the large
plastic drying mixer, the amount of lubricating oil in the reducer
and the integrity of the electrical equipment should be checked,
and then the total Switch, turn on the power supply, and perform
dry running test machine;
(2) Dry run test machine test. It can be used normally only if
there is no abnormal noise, high heating of the bearing gear, and
direct temperature rise of the reducer.
(3) If it is necessary to scrape the material on the inner barrel
wall of the machine during operation, use bamboo and wood tools and
do not use your hands to avoid injury to your hands;
(4) If it is found that the machine vibrates abnormally or makes
abnormal strange noises during use, the large plastic vertical
mixer should be stopped immediately for a comprehensive inspection;
(5) The use load should not be too large. Generally, it is
determined by the load of the motor. The heavy load current of the
380V motor when mixing plastic is normal. If the load is exceeded,
the amount of mixing should be reduced immediately.
(6) The shaft seals at both ends of the mixing screw should be kept
clean to avoid blackening and deterioration of the plastic. There
are square holes on the outer gears at both ends of the large
mixing barrel, which should be unblocked. Do not block the large
plastic vertical mixer to avoid it The back pressure effect causes
the dirt to penetrate into the shaft, and the material in the vat
is blackened and deteriorated
(7) Managers must be familiar with the technical performance,
internal structure, control structure and operating principles of
large-scale plastic vertical mixers. Do not leave the work place
during operation to prevent malfunctions and damage to the machine
parts, and to ensure safe production as a prerequisite;
(8) Turn on the power, open the cover of the color mixing machine,
hold the safety protection switch by hand, and then press the green
start switch, pay attention to the motor rotation (clockwise
rotation), if the direction is reversed, please press the red
switch to stop and turn off the power , Check and adjust.
(9) After confirming that the motor rotates correctly, it can be
put into production normally. Please set the time according to the
required mixing time of different materials (the timer is
adjustable from 0 to 30 minutes) for production use.
4.Crusher models
| Model(mm) | 500 | 600 | 800 | 1000 |
| Diameter(mm) | 500 | 600 | 800 | 1000 |
| Crushing capacity(kg/h) | 200--300 | 350--600 | 600--800 | 1000--1500 |
Gwell Machinery is a high-tech enterprise, committed to providing
customers with plastic sheet, board, film and other extrusion
lines. Gwell can provide turnkey projects, such as stone paper
project, EVA solar film project, PP building formwork
equipment,etc. Gwell has a strong technical equipment strength and
key capacity, committed to high-end product development,
international market development. “Realize customer value" is the
company's long-term business philosophy.The manufacturing bases of
the company are located in Taicang, Suzhou, which is close to the
beautiful scenery of Shanghai, Yancheng Dafeng, the hometown of
Red-crowned crane, and Nantong, the hometown of Education and
longevity in China. It covers a total area about 150,000 square
meters. It has an annual production capacity of more than 200
extrusion lines of various types of sheet and board.
