|
[China]
Trade Verify
Address: Office:Room 812,Block A,OCT Creative Center,No.221, North 1st Section of 3rd Ring Road,Chengdu City,Sichuan Province,China;
Contact name:Jurrivh
Chengdu Gute Machinery Works Co., Ltd. |
|
Verified Suppliers
|
|
|
Overview
CNC hoop bending machine can be used for one-time forming of stirrups, hooks, and special-shaped parts. It can automatically complete the straightening, sizing, bending, cutting and counting functions of rebar and round steel. The equipment uses a numerical control system, and controls the servo system through a touch screen and PLC. The finished stirrup has high processing accuracy, stable and reliable quality, and has strong graphic storage capabilities. It can save a lot of labor and waste. Improving processing efficiency is an indispensable part of modern construction buildings, and it is also an intelligent equipment that meets national standards.
Scope of application
Mainly used in the construction of housing construction, highways, roads and bridges, subways and other projects.
03
Device parameters
| Single wire bending diameter | 5–12mm |
| Double wire bending diameter | 5–8mm |
| Processing material | Steel coil |
| Maximum towing speed | 75-100 m/min |
| Maximum towing speed | 1050°/sec |
| Rib straightness error | 0.02/m |
| Total power | 31KW |
| Power consumption | 5KW/H |
| Bending direction | Bi-direction |
| Stirrup length accuracy | ±1mm |
| Rib length accuracy | ±5mm |
| Angle accuracy | ±1° |
| Maximum bending angle | ±180° |
| Maximum bending angle | 900mm |
| Shortest stirrup side | 90mm |
| Working temperature | -5~40 ℃ |
| Traction control method | Servo |
| Bend control method | Servo |
| Loopback control method | Servo |
| Total Weight | 3.3T |
Equipment advantages
The raw material pre-alignment mechanism consists of 14 straightening wheels. The spacing of each straightening wheel can be adjusted and controlled by bolts. The straightening wheel has double grooves for double wire straightening. At the same time, the straightening wheel is made of forged alloy tool steel, which is wear-resistant and impact-resistant.
The square head transition connection is adopted, and the strength is 12 times that of the traditional flat key connection. The traction pulley is made of forged alloy tool steel, which is wear-resistant and impact-resistant.
The split-type thick blade design is fixed on the blade seat with bolts, and the thickness reaches 40mm. It is quickly replaced, easy to maintain, and greatly reduces the maintenance cost of the equipment.
The touch screen console can store hundreds of graphics and is easy to operate.
Our factory
Our service
Certification
