Active Member
|
[China]
Address: MEIJI ROAD NO. 18, ZHONGYUAN DISTRICT, ZHENGZHOU CITY, HENAN PROVINCE, CHINA
Contact name:Jenny
Henan Tytion Machinery Co., Ltd. |
|
|
Smooth discharge Electric drive Screw Mortar Grout Pump homemade
Screw Mortar Grout Pump
Structure of Screw Mortar Grout Pump:
1. Frame
The frame is made of channel steel, Angle steel and steel plate,
with reasonable structure and convenient folding and assembling.
Base channel steel has fixed, steering pulley, easy to move,
construction. The frame should be fixed during grouting to avoid
shaking of the frame and affecting grouting.
2. Pressure measuring connector
The pressure measuring joint is three-way structure, one end is
M45×2 outlet thread, and the other end is connected to the pressure
measuring joint of the pressure gauge. Please fill the pressure
measuring joint of the pressure gauge with silicon oil or edible
oil before use. And check whether the eardrum is intact. The pump
uses YN60 shock pressure gauge (0-10mpa), the table has good
resistance to pressure and vibration performance, sensitive
indication value, durable, beautiful shape.
Parameters of Screw Mortar Grout Pump:
| Model | LBT2000 |
| Output | 2000-2500 L/H |
| Motor power | 4 kw |
| Sand particle size | ≤ 4 mm |
| Pressure | 2-4 Mpa(adjustable) |
| Hopper | 150 L |
Safety Precautions of Screw Mortar Grout Pump:
1. During construction, the slurry pump and grouting hose should be fixed, and the grouting hose should be in a relaxed state;
2. After grouting, it is necessary to clean the slurry pump and grouting hose in time, and the switch is in the stop position, in time
3. At any time can not put the hand into the hopper or hard things into the conveyor screw operation;
4. Pay attention to environmental safety.
Pictures of Screw Mortar Grout Pump:
