Thread Rebar Splice Coupling Steel Reinforced Thread Bar Coupler
for Rebar Connection
Usage
Steel Reinforced Coupler for Rebar Connection is designed to
produce a full strength mechanical joint between reinforcing bars,
replacing the need for lap splicing.
Features
1. Wide working range: adaptable for Φ12mm-Φ50mm same diameter, different diameter,
bending, new and old, advance covered up rebar of GB 1499, BS 4449,
ASTM A615 or ASTM A706 standard.
2. High strength: stronger than the reinforcement bar and
guarantees bar break under tensile stress(tensile strength of connection point =1.1 times of connected bar). It can satisfy the requirements stipulated in the Chinese standard
JGJ107-2003, JG171-2005.
3. High efficiency: upset forging and threading one joint only needs no more than one minute, and handy operation and quick
link.
4. Environmental protection and economy profit: no environment pollution, can work all day, not affected by weather, economize energy source
and bar material.
Specification
1. Material: Aisi 1045 High quality carbon steel.
2. Use: to splice rebar dia 12--50mm.
3. High strength, low cost, simple operation.
Specification | Outer Diameter | Inner Diameter +0.25mm | Length +2mm | Thread Pitch (mm) | Thread Angle |
D14 | 21 | 12.55 | 38 | M14.8x2.5P | 75° |
D16 | 24 | 14.50 | 43 | M16.8x2.5P | 75° |
D18 | 26 | 16.35 | 48 | M18.6x2.5P | 75° |
D20 | 29 | 18.45 | 53 | M20.6x2.5P | 75° |
D22 | 33 | 20.35 | 58 | M22.6x2.5P | 75° |
D25 | 37 | 23.15 | 63 | M26.0x3.0P | 75° |
D28 | 41 | 25.95 | 68 | M28.6x3.0P | 75° |
D32 | 47 | 30.15 | 80 | M32.8x3.0P | 75° |
D36 | 54 | 33.85 | 83 | M36.7x3.5P | 75° |
D40 | 59 | 37.55 | 88 | M40.4x3.5P | 75° |
Our Advantages
Good quality control in production process, ISO9001:2008, SGS, BV
approved.
Excellent quality and Competitive price, OEM is available.
Available in an extensive range of stock or custom size.
The whole process from material to finished products can be traced.
Our factory is close to the Ningbo port.
Why Choose Us
High tensile strength and the strength reach Grade II
Working rang : Φ16mm-Φ40mm
Strong intensity connector, stable and reliable; no specific
requirements on the weld ability of the rebar;
No flammable gases, not affected by rainy or cold weather;
Relieve congestion of the connecting point, facilitated concrete
pouring;
No professional and experienced worker needed, able to connect
changed steel bar of different diameters;
Save 80% of connector steel consumption.
Packing & Delivery
Packing Details: Rebar coupler will be packed in gunny bag, then
packed in wooden case, or package customize.
Delivery Details : within 7-25 days after receiving the payment.