Home Companies Sunrise Foundry CO.,LTD

Mechanical Joint Pipe Fittings AWWA C153 Ductile Iron MJ Fittings Reducers

Active Member

Contact Us

[China]

Contact name:Paul

Sunrise Foundry CO.,LTD

Mechanical Joint Pipe Fittings AWWA C153 Ductile Iron MJ Fittings Reducers

Country/Region	china
City & Province	ningbo zhejiang

Product Details

Mechanical Joint Pipe Fittings AWWA C153 Ductile Iron MJ Fittings Reducers

Factory Introduction

Sunrise Foundry is a professional Metal Foundry, located in Ningbo. We have been producing:

Ductile iron pipe-fittings
(AWWA C110/C153, AS2280, EN545, EN598, EN969, ISO2531, NBR7675) fixed flange and loose flange and mechanical joint and push in joint, and express joint, pvc socket, total 6 type joint, various Bend, tee, reducer, duckfoot, bell mouth)

Manhole covers and gratings
(single seal and double seal and water tight manhole cover, gully grating, channel grating, Surface box, meter box, valve box, step iron, manhole cover key)

Valve

AWWA C509, BS5163, DIN 3352 F4 / F5 gate valve, BS5153 check valve, air valve. Y strainer. Control valve. Pillar Hydrant, understand ground hydrant.
(BS750 Pillar hydrant, underground hydrant, duck foot bend)

Ductile iron flange

BS4504, ANSI ductile iron flange casting. Screw type, weld on type, uni flange, quick pvc joint flange.

Flange adapter, coupling

Wide range Flange adapter, flexible coupling, and dismantling joint. Split taping tee, Tapping Saddles. Pvc pipe, steel pipe, ductile iron pipe Collar, Gibault joint, Restrained coupling.

Accessories
(Sealing gasket, rubber ring, bolts & nuts, PE sleeve, denso tape, wire mesh, pipe tooling, etc.)

Product Details

Material	ductile iron
Size	DN50-DN2000
PN	PN10 PN16 PN25
Standard	EN545 EN598 ISO2531 BS4772
Surface treatment	Fusion bonded epoxy coating cement lining inside and zinc and bitumen coating outside Zinc+bitumen inside and outside.
Application	Storm water systems Waste water systems Irrigation systems

EN545 / ISO2531 / NBR7675 ductile iron pipe bend fittings product data

	Centrifugal Cast Pipes		Fittings
	DN80toDN1000	DN1100toDN2600
Tensile Strength	Min.420N/mm2		Min.420N/mm2
Elongation	Min.10%	Min.7%	Min.5%
Proof Stress	Min.30N/mm2		Min.300N/mm2
Hardness	Max.230HB		Max.250HB

Deviation and tolerances on length

Type of fitting	Length	Deviation(mm)
Flanged socket	L	DN80 to DN1200 ± 25 DN1400 to DN2000 ± 35
Flanged spigot
Collar
Taper
Bend90°	t	±(15+0.03DN)
Bend45°	t	±(10+0.025DN)
Bend22.5°and11.25°	t	DN80toDN1000±(10+0.02DN) DN1200toDN2000±(10+0.025DN)
Tee	L and h	DN80toDN1200-25+50 DN1400todn2000-35+75

Leak-tightness test

Nominal size DN	Hydrostatic tightness test pressure bar
	Fittings	DI Pipe with weld-on or screwed-on flange
		PN10	PN16	PN25	PN40
80≤DN≤300	25	16	25	32	40
350≤DN≤600	16
700≤DN≤2000	10