SHENZHEN YITUOWULIAN SYSTEM CO.,LTD |
|
Mini Elderly Personal GPS Tracker Waterproof For Mobile Phone APP
Performance Parameters:
Content | Specs. |
Dim. | 50*50*15mm (mm) |
Weight | 0.2kg |
Network | GSM/GPRS |
Band | 900/1800/1900MHz or 850/900/1800/1900MHz |
GPS chip | Ublox-7 |
GPS sensitivity | -159dBm |
GPS accuracy | 5 m |
Time To First Fix | Reacquisition 0.1s Cold status 45s Warm status 35s Hot status 1s |
Work Voltage | DC 3.7-4.5V |
Battery | Chargeable changeable 3.7V /1000Mah Li-ion battery |
Standby work current | < 30mA |
Storage Temp. | -40°C to +85°C |
Operation Temp. | -20°C to +70°C |
Humidity | 5%--95% non-condensing |
Description:
1. Hardware Introduction
1.1. Buy one Sim Card and confirm the following details:
This sim card can be used to make call, send SMS, and gets GPRS
function. This sim card gets enough money for GPS
tracking service. This sim card gets caller ID display
function, no call forwarding. The SMS format should be
text format, not PDU format. (Most countries use text format for
SMS)
1.2. Please use the screw driver to open the GPS tracker, and Insert the sim card with the correct direction (golden part faces down).
1.3 The first time you use this tracker, please charge the GPS tracker 12 hours, so that the battery can get a good performance, Normally, it only takes 3-5 hours to charge battery fully. Because the battery in tracker is li battery, so don’t squeeze it illegally, or put it into fire. The normal standby time of battery is 100 hours.
1.4. Please use the power charger in standard kit to charge our GPS tracker.
2. Device Activation.
2.1 Bring GPS tracker to open air, and press power switch for 3
seconds, then you can see the indication light will be on. Then GPS
tracker will start to search GSM and GPS signal automatically. 2.2.
According to the light status, user can judge the GPS tracker
status. Once the GPS signal is ready, you can set all functions in
user manual.
3. Administrator number setting(Master number setting)
3.1 How to add admin phone number: (Default factory setting
password:123456) Instruction: admin+password+space+country
code+ GSM number For example: admin123456 08615899778447 Then
system will reply a SMS: admin ok Notice: User can only use admin
number to set SOS number in, furthermore, never cancel the space
and country code, the first time you use this tracker, please
change the password by the following instruction: password+old
123456+space+new 123456 For example:password123456 666888
Once you change the password, you can receive a SMS from tracker
“password ok”
3.2 How to delete admin phone number: Instruction:
noadmin+password+space+country code+ GSM number 3.3
SOS alarm phone number setting Instruction:
sos+password+space+country code+sos phone number
For example: if your send SMS instruction: sos123456
08615899778447 to GPS tracker, GPS tracker will send you a SMS back
with “SOS number ok”, in future, if you long press SOS button for 3
seconds. GPS tracker will send a SOS SMS to all SOS phone
number.
3.3.1 Set SOS phone number(support 2 group SOS phone numbers)
Instruction:
LED light status Normally on without flash Charging Flash Low
battery Off Full battery
4. Set GMT Time zone number: Instruction: time
zone+123456+space+GMT No. For example, Finland is GMT+2 zone, so
user can set: timezone123456 +2. Then GPS tracker will be adjusted
to be the right time zone “Time OK”
5. Inquire location
Inquire Location by call If you have set an
admin phone number, you can call GPS tracker and get location SMS,
but phone number which has not been registered can’t inquire
location SMS. If you haven’t set admin phone number, any phone
number can be used to inquire location SMS.
When you use admin number to call GPS tracker, the GPS tracker will
remind you “ the phone number you call is busy”, then you can hang
up the call, the GPS tracker will send a location SMS to you
automatically soon like follow:
6. Listen-in function GPS tracker has two modes: one is
tracking mode, the other mode is Listen-in mode, the default
setting is tracker model, so when user call GPS tracker, a tracking
SMS will be sent back, if user want to listen in GPS tracker by
phone call, user has to change the mode first by instruction “
Monitor+password”, then tracker will send a SMS back “ Monitor ok”,
then when you call the GPS tracker, you can listen-in what happen
near the tracker. If user want to recover to tracker mode, user can
send “ tracker+password”, then GPS tracker will be in tracking
mode.
7. G-Fence alarm
We suggest that this setting will be set by Web GPS
CMS. User can use this function to define the working range, once
the GPS tracker step out of this working range, it will send an
alarm to admin phone number.
8. Moving Alarm: Instruction: Move+password+moving
semidiameter Put GPS tracker on desk without moving for 3-10
minutes, then send instruction to GPS tracker, the default setting
distance is 500 meters. If user want to set it to be 1000meters,
user can write like “ Move1234561000”, then the GPS tracker will
set a moving alarm range with 1000 meters semidiameter. User can
set this function in GPS APP also. Cancel moving alarm:
nomove+password SMS reply: Nomove ok. Notice: The
moving semidiameter should be 500 meters, or more.
9. Over speed alarm Instruction: speed+password+space+ speed
For example: speed123456 080, then tracker will
reply: “speed ok” If the tracker move
over 80km/h, GPS tracker will send a SMS to admin phone number “
Speed alarm+080!+ longitude and latitude. GPS tracker will send
over speed alarm SMS every 5 minutes.
Cancel over speed alarm: Instruction: nospeed+password Reply
SMS:nospeed ok
Notice: The speed motioned above less than 50km/h will bring some
influence to GPS signal, then bring some drift.
10. Low battery alarm Once the tracker battery get close to 3.7V, GPS tracker will send a low battery alarm SMS to admin phone number.
11. Working mode setting: There are three working modes setting for
GPS tracker: 1. Timing Sleep mode Instruction:
sleep+password+space+time(minutes) For example: Sleep123456 10 , if
user send this instruction to tracker, tracker will reply “ Sleep
time ok”, without any operations (by button, SMS or Call)for 10
minutes, it will step into sleep mode, GPS function and LED light
will be turned off, after that, if you press any GPS tracker
button, send SMS, or make a call to GPS tracker, it will be waked
up. Of course, this mode will work under no vibration alarm
setting.
12. Recover factory setting and reset GPS tracker 12.1.
Recover factory setting: Instruction:format+password Notice: Once
user send this instruction to GPS tracker, all setting which has
been done by user will be canceled. Only Admin phone number can
executive this instruction.
Applications:
Pet shop , pet company , GPS producer , large-scale shopping
malls , exclusive agency , chain shops , large-scale sales
Gurantee:
1. All of our product is free to use the Tracking service
server in 24 hours each day
2. All of our product there is a 2 year quanlity assurance.
3. Sample fee will not be returned.
Product Configuration:
1. Standard configuration
1) main device
1 pcs
2) charger
1 pcs
3) Installation cables 1 set
4) Usage instructions
5) Warranty card
6) Certification