|
[China]
Trade Verify
Address: 4/F, Building 1, High-tech Industrial Park, No.1 Dezheng Road, Shilong, Shiyan Subdistrict, Bao'an District, Shenzhen 518108, China
Contact name:Ophelia Feng
Shenzhen Gigaopto Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
10GBASE eZR 100km 1550nm Cisco Compatible Fiber Transceiver Module For SFP-10G-ZR100
Description Of Cisco SFP 10G ZR100 Fiber Transceiver Module
This Cisco SFP-10G-ZR100 compatible fiber transceiver module is a high-performance and cost-effective 10Gb/s SFP+ eZR transceiver module for 10 Gigabit Ethernet links up to an ultra-long distance of 100km over Single Mode fiber using a wavelength of 1550nm.
This SFP-10G-ZR100 module complies with SFP+ MSA specifications (SFF-8431, SFF-8432, SFF-8472), 10 Gigabit Ethernet specifications (10GBASE-ZR/ZW per IEEE 802.3ae ), and 10G Fibre Channel standards. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472.
This SFP-10G-ZR is capable to interconnect with wide range of Cisco network equipment seamlessly, such as Cisco 3100 WS series, Cisco 4500 WS series, Cisco 4900 series, Cisco 5700 Air series, Cisco 6000, Cisco 6800 series, Cisco C6800 series, Cisco Nexus 2000 series, Cisco Nexus 3000 series, Cisco Nexus 5000 series, Cisco Nexus 7000 series, Cisco Nexus 9000 series, Cisco WS-C2960S series, Cisco WS-C3560E series, Cisco UCS series and etc.
Specification Of Cisco SFP 10G ZR100 Fiber Transceiver Module
| Compatible Brand | Cisco | P/N(Part No.) | SFP-10G-ZR100 |
| Vendor | Gigaopto | Type | 10Gbps SFP+ |
| Wavelength | 1550nm | Cable Distance | 100km |
| Transmitter | EML Laser | Receiver | APD |
| TX Output Power | 1~5dBm | RX Sensitivity | < -25dBm |
| Power-budget | 26dB | Extinction Ratio | >8.2dB |
| Power Consumption | ≤1.8W | Overload | >-6dBm |
| DOM Support | Yes | Temperature Range | 0 to 70°C |
| OEM/ODM | Supported | Warranty | 3 years |
Notice: When the long-reach transceiver is used in short-distance transmission, please matched with appropriate attenuator according to the table.
| Distance | ≤ 10km | ≤ 30km | ≤ 50km |
| Attenuator | 12dB | 10dB | 5dB |
Features Of Cisco SFP 10G ZR100 Fiber Transceiver Module
Application Of Cisco SFP 10G ZR100 Fiber Transceiver Module
Electrical and Optical Characteristics Of Cisco SFP 10G ZR100 Fiber Transceiver Module
| SFP-10G-ER100 Electrical Characteristics | ||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
| Total Supply Current | ICC | 300 | mA | |||
| Transmitter | ||||||
| Transmitter Differential Input Voltage | 180 | 1200 | mV | |||
| Tx_Fault Output Voltage - High | VOH | 2.4 | Vcc | V | LVTTL | |
| Tx_Fault Output Voltage - Low | VOL | 0 | 0.4 | V | LVTTL | |
| Tx_Disable Input Voltage - High | VIH | 2 | Vcc | V | LVTTL | |
| Tx_Disable Input Voltage - Low | VIL | 0 | 0.8 | V | LVTTL | |
| Input Differential Impedance | 90 | 100 | 110 | Ω | ||
| Receiver | ||||||
| Receiver Differential Output Voltage | 300 | 850 | mV | |||
| LOS Output Voltage - High | VOH | 2.4 | Vcc | V | LVTTL | |
| LOS Output Voltage - Low | VOL | 0 | 0.4 | V | LVTTL | |
| Output Differential Impedance | 90 | 100 | 110 | Ω | ||
| SFP-10G-ER100 Optical Transmitter Characteristics | |||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | |
| Average Output Power | POUT | 1 | 5 | dBm | |||
| Center Wavelength | λc | 1530 | 1550 | 1565 | nm | ||
| Spectral Width(-20dB) | ∆λ | 1 | nm | ||||
| Side Mode Suppression Ratio | SMSR | 30 | dB | ||||
| Extinction Ratio | ER | 8.2 | dB | ||||
| Relative Intensity Noise | RIN | -128 | dB/Hz | ||||
| Optical Rise/Fall Time | TR/TF | 28 | 50 | ps | |||
| Transmitter and Dispersion Penalty | TDP | 2 | dB | ||||
| Transmitter OFF Power | POFF | -30 | dBm | ||||
| Output Eye Diagram | Complies with IEEE802.3ae | ||||||
| Optical Receiver Characteristics | |||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | |
| Center Wavelength | λc | 1260 | 1610 | nm | |||
| Receiver Sensitivity | PSEN | -25 | dBm | 1 | |||
| Input Saturation Power (Overload) | PSAT | -6 | dBm | ||||
| Receiver Reflectance | -12 | dB | |||||
| LOS De-assert Level | LOSD | -26 | dBm | ||||
| LOS Assert Level | LOSA | -38 | dBm | ||||
| LOS hysteresis | HYS | 0.5 | 6 | dB | |||
Note 1. Measured with PRBS231-1 pattern, @10.3125Gbps, ER=8.2dB, BER=1x10-12.
Package Outline Of Cisco SFP 10G ZR100 Fiber Transceiver Module
Dimensions are in millimeters. All dimensions are ±0.1mm unless otherwise specified. (Unit: mm)
FAQ
Q: Are you trading company or manufacturer?
We are original manufacturer. We can do OEM/ODM business. Our company mainly produces SFP Transceiver.
Q: What are your main products?
PON, SFP, SFP+, SFP28, QSFP+, QSFP28, CFP/CFP2/CFP4, FC, Video SFP, 1x9, XFP, x2, Xenpak, SFF optical transceiver series, as well as Active Optical Cable, Direct Attach Cable, OSA and so on. etc.
Q: Why choose GigaOpto?
1. Prompt delivery and remarkable services
2. Competitive selling prices
3. Rich experience in OEM & ODM co-operation
4. 100% new materials for production and 100% reliable quality
Q: How can you guarantee the quality?
GigaOpto has rich experience in providing trusted quality service to customers, with a perfect quality management system, all of our products were 100% tested before shipment.
Q: What about the warranty of this Cisco SFP 10G ZR100 Fiber Transceiver Module?
3-year warranty for new products, and lifetime technical support.
Q: Can I have a sample order? What is your MOQ for this Cisco SFP 10G ZR100 Fiber Transceiver Module?
Yes, a sample order is available for your testing and checking quality. Mixed samples are acceptable, our MOQ is just one piece.
Q: Could I use our own logo, label and package on this Cisco SFP 10G ZR100 Fiber Transceiver Module?
Yes, we can help you to market your own brand of 3rd party
transceivers
OEM customization : Your LOGO (Labeling); Your P/N (Labeling);Your
S/N (Labeling);
EEPROM information: Vendor name: customized your information; P/N: customized your information; S/N: customized your information.
Q: What are your payment terms for this Cisco SFP 10G ZR100 Fiber Transceiver Module?
We accept T/T, Western Union, Paypal, L/C, etc. For samples: 100% payment. Formal order: 30%as deposit, 70% balance payment before shipment. Gigaopto may be able to agree to more flexible terms with regular customers or customers with special large orders or products.
Q: How do you ship the goods and how long does it take to arrive?
We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5
days to arrive.
