|
[China]
Trade Verify
Address: 4/F, Building 1, High-tech Industrial Park, No.1 Dezheng Road, Shilong, Shiyan Subdistrict, Bao'an District, Shenzhen 518108, China
Contact name:Ophelia Feng
Shenzhen Gigaopto Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
QSFP+ 40G ER4 40km 1270nm/1290nm/1310nm/1330nm CWDM SMF Optical Transceiver Module for Ethernet and Date Center
Description
The 40GBASE-ER4 QSFP Module supports link lengths up to 40km over G.652 single-mode fiber with duplex LC connectors. The 40GE or OTU3 signal is carried over four wavelengths in the 1310nm range. Multiplexing and demultiplexing of the four wavelengths are managed within the device.
They are compliant with the QSFP+ MSA and IEEE 802.3bm 40GBASE-ER4 and OTU3 standards .
Digital diagnostic functions are available via an I2C interface, as specified by the QSFP+ MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU5 .
Specification
| Form Factor | QSFP+ | Bandwidth (Gbps) | 44.8Gbps (4×11.2Gbps) |
| Wavelength | 1271nm/1291nm/1311nm/1331nm | Distance | 40km |
| Interface | LC Duplex | Cable Type | SMF |
| Transmitter Type | DFB CWDM | Receiver Type | APD |
| TX Output Power | -2.7~4.5dBm | Receiver Sensitivity | <-21.2dBm |
| Optical budget | 18.5dB | Receiver Overload | >-4.5dBm |
| Power Consumption | ≤3.5W | Saturation (ER) | >5.5dB |
| DDM/DOM Diagnostic | Supported | Host FEC | Supported |
| Bit Error Ratio (BER) | 1E-12 | Temperature Range | 0 to 70°C (32 to 158°F) |
| OEM/ODM | Supported | Warranty | 3 -year |
Notice: When the long reach transceiver is used in short distance transmission, please matched with appropriate attenuator according to the table.
| Distance | ≤ 15km | ≤ 25km |
| Attenuator | 10dB | 5dB |
Features
Application
Standard
Performance Specifications - Electrical
| Parameter | Symbol | Min. | Typ. | Max | Unit | Notes |
| Supply voltage | 3.1 | 3.47 | V | |||
| Supply Current | Icc | 1.44 | A | |||
| Transmit turn-on time | 2000 | ms | Note3 | |||
| Transmitter | ||||||
Differential Input Voltage Swing | Vin,pp | 190 | 700 | mVp-p | ||
| Input Impedance (Differential) | Zin | 90 | 100 | 110 | ohms | Rin > 100 kohms @ DC |
| Receiver | ||||||
Differential output Voltage Swing | Vout,pp | 300 | 850 | mVp-p | ||
AC common mode output voltage | 7.5 | mV | RMS | |||
Output Impedance (Differential) | Zout | 90 | 100 | 110 | ohms | |
| Output Transition Time | 28 | ps | 20%~80% | |||
Note3: From power-on and end of any fault conditions.
Optical Characteristics
| Parameter | Symbol | Min. | Typical | Max. | Unit |
| Transmitter | |||||
| Signaling Speed per Lane | BRAVE | 10.3125 | 11.2 | Gbps | |
| Side Mode Launch Power | SMSR | 30 | dB | ||
| Total average launch power | PT | 10.5 | dBm | ||
| Lane_0 Center Wavelength | λC0 | 1264.5 | 1271 | 1277.5 | nm |
| Lane_1 Center Wavelength | λC1 | 1284.5 | 1291 | 1297.5 | nm |
| Lane_2 Center Wavelength | λC2 | 1304.5 | 1311 | 1317.5 | nm |
| Lane_3 Center Wavelength | λC3 | 1324.5 | 1331 | 1337.5 | nm |
| Average Launch Power per Lane*(Note4) | Peach | -2.7 | 4.5 | dBm | |
Average launch power of OFF transmitter per lane | -30 | dBm | |||
| Relative Intensity Noise | Rin | -128 | dB/Hz | ||
Optical modulation amplitude*(Note5) | Poma | 0.3 | 0 | 5.0 | dBm |
| Optical Return Loss Tolerance | 20 | dB | |||
Differnce in Launch Power between any two lanes | Ptx,diff | 4.7 | dB | ||
| Transmitter Reflectance | RT | -12 | dB | ||
| Extinction Ratio*(Note6) | ER | 5.5 | dB | ||
Transmitter eye mask definition{X1, X2, X3, Y1, Y2, Y3}*(Not6) |
{0.25,0.4,0.45,0.25,0.28,0.4} | ||||
| Receiver | |||||
| Signaling Speed per Lane | BRAVE | 10.3125 | Gbps | ||
| Data Rate Variation | -100 | +100 | ppm | ||
| Damage threshold*(Not7) | Rdam | 3.8 | dBm | ||
| Lane_0 Center Wavelength | λC0 | 1264.5 | 1271 | 1277.5 | nm |
| Lane_1 Center Wavelength | λC1 | 1284.5 | 1291 | 1297.5 | nm |
| Lane_2 Center Wavelength | λC2 | 1304.5 | 1311 | 1317.5 | nm |
| Lane_3 Center Wavelength | λC3 | 1324.5 | 1331 | 1337.5 | nm |
Average Receive Power per Lane | Rpow | -21.2 | -4.5 | dBm | |
Receiver Sensitivity in OMA per Lane*(Note8) | Pmin | -19 | dBm | ||
Stressed Receiver Sensitivity (OMA) per Lane *(Note9) | RXSRS | -16.8 | dBm | ||
| Conditions of stressed receiver sensitivity test: | |||||
Vertical Eye Closure Penalty *(Note10) | VECP | 2.2 | dB | ||
| Stressed J2 Jitter *(Note10) | J2 | 0.3 | UI | ||
| Stressed J9 Jitter *(Note10) | J9 | 0.47 | UI | ||
| LOS Assert | LOSA | --35 | dBm | ||
| LOS De-Assert | LOSD | -23 | dBm | ||
| LOS Hysteresis | 0.5 | dB | |||
Note4: Average launch power, each lane (min) is informative and not the principal indicator of signal strength. A
transmitter with launch power below this value cannot be compliant; however, a value above this does not ensure
compliance.
Note5: Even if the TDP < 0.8dB, the OMA (min) must exceed this value.
Note6: Filtered, measured with a PRBS 231-1 test pattern @10.3Gbps.
Note7: The receiver shall be able to tolerate, without damage, continuous exposure to an optical input signal
having this average power level.
Note8: Minimum average optical power measured at BER less than 1E-12, with a 231-1 PRBS.
Note9: Measured with conformance test signal at TP3 for BER=1E-12.
Note10: Vertical eye closure penalty, stressed eye J2 Jitter, stressed eye J9 Jitter are test conditions for
measuring stressed receiver sensitivity. They are not characteristics of the receiver.
Compatibility
All Gigaopto’s transceivers are standards-based and MSA (Multi-Source Agreement) compliant, and rigorously tested and coded in our own facilities to ensure the highest level of performance. We conduct 100% application testing under end-use conditions.
For this GTQ-B13A4-40DC optical transceiver, please refer to the P/N correspondence table. For more product compatibility, please don't hesitate to let us know.
| Corresponding Compatible Brand/Part Number | |||
| Brand | Part Number | Brand | Part Number |
| Gigaopto | GTQ-B13A4-40DC | Arista | QSFP-40G-ER4 |
| Cisco | QSFP-40G-ER4 | HW | 02311BKT/QSFP-40G-ER4 |
| Extreme | 10335 | Juniper | QSFP-40G-ER4 |
| DELL | 430-4917-40 | Brocade | 40G-QSFP-ER4 |
| D-Link | DEM-QX40Q-ER4 | Mellanox | MC2210511-ER4 |
| F5 Networks | F5-UPG-QSFP+ELR4 | Fortinet | FG-TRAN-QSFP+ER |
| Avago | QSFP-40G-ER4 | Palo Alto Networks | PAN-40G-QSFP-ER4 |
| H3C | QSFP-40G-ER4-SM1310 | MikroTik | Q+31DLC40D |
| Allied Telesis | QSFPER4 | HPE H3C | JL306A |
| Edge-Core | PAN-40G-QSFP-ER4 | Check Point | CPAC-TR-40ER-SSM160-QSFP-C |
| Intel | E40GQSFPER | Ciena | QSFP-ER4 |
| MRV | QSFP-40G-ER | AvayA | AA1404003-E6 |
| Alcatel-Lucent | QSFP-40G-ER | ZTE | QSFP-40GE-S40K |
| Quanta | QSFP-ER4-40G | ||
For More of our QSFP+ 40GBASE Transceiver Series, please refer to the following form
| P/N | Description | Wave Length | Reach | TX/RX | TX Power (dBm) | Rx Sens. (dBm) | Connector |
| GTQ-M85A4-02DC | 40G SR4 | 850nm | 150m | VCSEL/PIN | -7.6~2.4 | <-9.5 | MTP/MPO-12 |
| GTQ-B08A4-02DC | 40G SR BiDi | 850/900nm | 150m | VCSEL/PIN | -4~5 | <-11 | LC |
| GTQ-B08A4-04DC | 40G eSR4 | 850nm | 300m | VCSEL/PIN | -7.5~0 | <-11 | MTP/MPO-12 |
| GTQ-M13A4-02DC | 40G PSM IR4 | 1310nm | 1.4km | DFB/PIN | -5.5~1.5 | <-11.5 | MTP/MPO-12 |
| GTQ-L13A4-M2DC | 40GBASE-UNIV | 1310nm | 150m/2km | DFB/PIN | -7~4.3/-10~2.3 | <-10/<-13.7 | LC |
| GTQ-L13A4-02DC | 40G LR4 Lite | 1310nm CWDM | 2km | DFB/PIN | -7~2.3 | <-11.5 | LC |
| GTQ-M13A4-10DC | 40G LR4 | 1310nm CWDM | 10km | DFB/PIN | -7~2.3 | <-11.5 | LC |
| GTQ-M13A4-10DC | 40G PSM4 | 1310nm | 10km | DFB/PIN | -6~-1 | <-14.4 | MTP/MPO-12 |
| GTQ-M13A4-20DC | 40G eLR4 | 1310nm CWDM | 20km | DFB/PIN | -4.5~2.3 | <-12.5 | LC |
| GTQ-B13A4-40DC | 40G ER4 | 1310nm CWDM | 40km | DFB/APD | -2.7~4.5 | <-21.2 | LC |
| GTQ-M13A4-02DC | 40G PSM4 Lite | 1310nm | 2km | DFB/PIN | -6~-1 | <-14.4 | MTP/MPO-12 |
| GTQ-B13A4-30DC | 40G ER4 Lite | 1310nm CWDM | 30km | DFB/APD | -3.7~4.5 | <-18 | LC |
