|
[China]
Trade Verify
Address: 4/F, Building 1, High-tech Industrial Park, No.1 Dezheng Road, Shilong, Shiyan Subdistrict, Bao'an District, Shenzhen 518108, China
Contact name:Ophelia Feng
Shenzhen Gigaopto Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Generic Compatible 100GBASE-LR4 CFP2 10km Optical Transceiver Module SMF 1310nm LC DOM
Description
Gigaopto’s GTC2-L13B4-10DC CFP2-100G-LR4 transceiver is designed for use in 100 Gigabit Ethernet interfaces over single mode fiber. It is compliant with the CFP2 MSA and IEEE 802.3ba 100GBASE-LR4 specifications.
Digital diagnostics are available via the MDIO interface, as specified in the CFP MSA Management Interface Specification Note AN-21185. The transceiver's designs are optimized for high performance and cost efficiency to provide customers the best solutions for Datacom and Telecom applications.
The transceiver is RoHS-6 compliant and lead-free per Directive 2002/95/EC.
100GE CFP2 LR4 Module Block Diagram
Specification
| Form Factor | CFP2 | Connector | LC-Duplex |
| Cable Type | singlemode | Type | LR4 |
| Link Distance | 10km | Temperature Range | 0 to 70°C |
| Lane Count | 4×(TX/RX) | Bandwidth (Gbps) | 103Gbps-111.8Gbps |
| Bandwidth per lane | 25.78Gbps-27.95Gbps | Digital Diagnostics | Support |
| Power Consumption | < 6W | CDR | TX & RX Built-in CDR |
| Power Budget (dB) | 6.3dB | Transmit per Lane | -4.3dBm ~ + 4.5dBm |
| Receiver per Lane | -10.6dBm ~ 4.5dBm (overload) | Wavelength | 1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm |
| Laser Type | 4 x LAN WDM EML | Receiver Type | PIN |
| Extinction Ratio | >4dB | OEM/ODM | Supported |
| Protocols | 100G Ethernet, OTU4 | ||
Features
Application
Optical Characteristics (Top=0~70℃,VCC=3.13to3.46 Volts)
Parameter |
Symbol |
Unit | Value | ||
| Min | Typ | Max | |||
| Optical Transmitter Characteristics | |||||
| Signaling Rate for Each Lane (100GbE) |
- |
Gbps | 25.78125 | ||
| Signaling Rate for Each Lane (OTU4) | 27.9525 | ||||
Four lane Wavelength Range | 入 1 |
nm | 1294.53 | 1295.56 | 1296.59 |
| 入 2 | 1299.02 | 1300.05 | 1301.09 | ||
| 入 3 | 1303.54 | 1304.58 | 1305.63 | ||
| 入 4 | 1308.09 | 1309.14 | 1310.19 | ||
| Average Launch Power for Each Lane(100GbE) |
Pa |
dBm | -4.3 | +4.5 | |
| Average Launch Power for Each Lane(OTU4) | -2.5 | +4.5 | |||
| Extinction Ratio (100GbE) |
EX |
dB | 7 | ||
| Extinction Ratio (OTU4) | 7 | ||||
| Optical Receiver Characteristics | |||||
| Receiver Sensitivity in OMA for Each Lane(100GbE) |
Sen |
dBm | - | - | -8.6(1) |
| Receiver Sensitivity for Each Lane(OTU4) | -10.3(2) | ||||
| Los Assert | dBm | -15 | |||
| Los De-assert | dBm | -19 | |||
| Los Hysteresis | dB | 1 | 2 | ||
Notes
1. Measured with 25.78125Gbps,PRBS 231-1,BER<1E-12
2. Measured with 27.95Gbps,PRBS 231-1,BER<1E-12
Compatibility
All Gigaopto’s transceivers are standards-based and MSA (Multi-Source Agreement) compliant, and rigorously tested and coded in our own facilities to ensure the highest level of performance. We conduct 100% application testing under end-use conditions.
For this GTC2-L13B4-10DC, please refer to the P/N correspondence table. For more product compatibility, please feel free to tell us.
| Corresponding Compatible Brand/Part Number | |||
| Brand | Part Number | Brand | Part Number |
| Gigaopto | GTC2-L13B4-10DC | Cisco | CFP2-100G-LR4 |
| Juniper | CFP2-100GBASE-LR4 | Arista | CFP2-100GBASE-LR4 |
| Brocade | 100G-CFP2-LR4-10KM | Dell | CFP2-100GBASE-LR4 |
| Extreme | 10330 | HW | CFP2-100G-LR4 |
| H3C | CFP2-100G-LR4 | ||
Mechanical Dimensions
