Qualfiber Technology Co.,Ltd |
|
1064nm High Power Dual-stage Fiber Optic Isolator 1-20W
product description
Fiber optic isolators primarily use the Faraday effect of magneto-optical crystals to isolate reflected light, allowing passive magneto-optical devices that transmit light in a single direction. Fiber optic isolators are used to protect the source from adverse effects caused by back reflections or signals; back reflections can damage the laser or cause mode hopping, amplitude variations, or frequency shifts. In high power applications, back reflection can also cause instability and power spikes.
The isolators produced by Mingchuang Optoelectronics have high isolation, low insertion loss and high withstand power. The different wavelength, power and fiber isolators can be customized according to user needs. The products are widely used in fiber lasers, fiber amplifiers, laser communication, fiber transmission. Sense, scientific research, and other fields.
Features
1 high isolation
2 high withstand power
3 low insertion loss
4 low polarization-dependent loss
5 high stability and reliability
Application field
1 fiber laser
2 fiber sensing
3 fiber amplifier
4 Research in the field of optical communication
5 light test instruments, etc.
Product index
parameter | unit | Numerical value |
Center wavelength | Nm | 1064 |
Operating wavelength range | Nm | ± 1 0 |
Peak isolation (typical) | dB | 50 |
Isolation ( minimum ) | dB | 45 |
Insertion loss (typical) | dB | 1.4 |
Insertion loss ( maximum ) | dB | 1.6 |
Polarization dependent loss (maximum) | dB | 0.2 |
Withstand optical power ( CW) | W | 5 , 10 , 20 or other |
Peak power (pulse) | W | 1K , 5K , 10K |
Minimum return loss (input / output) | dB | 50/50 |
Fiber type | - | Hi1060 or other |
Withstand tension | N | 5 |
Operating temperature | °C | -5 ~ +6 0 |
storage temperature | °C | -20 ~ +85 |
* Temperature measurement environment at 23 ° C
** If the connector is added, the insertion loss is increased by 0.3dB, the return loss is reduced by 5dB, and the extinction ratio of the polarization-maintaining product is reduced by 2dB.
Selection information
QFHDI | 1 | 2 | 3 | 4 | 5 | 6 |
Working wavelength | Optical power | Power type | Fiber type | Pigtail length | Tail type | |
1064-1064nm 1080-1080nm S- other | 05-5W 10-10W 20-20W S- other | P- pulse C- continuous | 06-Hi1060 101-10/125SCF 102-10/125DCF 202-20/125DCF S- other | 08-0.8m 10-1.0m 15-1.5m S- other | B-250um bare fiber L-900um loose tube S- other |
If you need more detailed information, please contact our sales staff, we reserve the right to amend the indicator without prior notice.