Active Member
|
[China]
Address: No. 55 building,Zhangkeng Industrial Park,Minzhi,Longhua District,Shenzhen,Guangdong Province,China
Contact name:Richard
Qualfiber Technology Co.,Ltd |
|
|
EPON ONU 1GE 3FE WIFI POTS Epon HGU QF-HE103WC Family Gateway 1G3F POTS WIFI with 2 Antennas
1. Overview
n 1G1F+WIFI+POTS ONU is designed as HGU (Home Gateway Unit) in deferent FTTH solutions by Qualfiber, The carrier-class FTTH application provides data service access.
n 1G1F+WIFI+POTS ONU is based on mature and stable, cost-effective EPON technology. It can access to the major EPON OLT.
n 1G1F+WIFI+POTS ONU adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.
n 1G1F+WIFI+POTS ONU is designed by Realtek chipset 9603C.
Outline
2. Functional Feature
n Support EPON Mode
n Support ONU auto-discovery/Link detection/remote upgrade of software
n WAN connections support Route and Bridge mode
n Route mode supports PPPoE/DHCP/ static IP
n Support WIFI Interface and multiple SSID
n Support QoS and DBA
n Support port Isolation and port vlan configuration
n Support Firewall function and IGMP snooping multicast feature
n Support LAN IP and DHCP Server configuration
n Support POTS interface for Voip Service
n Support Port Forwarding and Loop-Detect
n Support TR069 remote configuration and maintenance
n Specialized design for system breakdown prevention to maintain stable system
3. Hardware Specification
Technical item | Details |
PON Interface | 1 EPON port (EPON PX20+ ) |
Receiving sensitivity: ≤-28dBm | |
Transmitting optical power: 0~+4dBm | |
Transmission distance: 20KM | |
Wavelength | TX: 1310nm, RX: 1490nm |
Optical Interface | SC/UPC Connector or customized |
LAN Interface | 1 x 10/100/1000Mbps and 1 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
POTS Interface | 1 FXS, RJ11 connector |
Wireless | Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: 78dBuV AGC range: 0~-15dBm MER: ≥32dB@-15dBm Modulation type: DSSS, CCK and OFDM Encoding scheme: BPSK, QPSK, 16QAM and 64QAM |
LED | 9, For Status of POWER,LOS,PON,SYS,LAN1,LAN2,WIFI,WPS,Internet |
Push-Button | 3,For Function of Reset,WLAN,WPS |
Operating Condition | Temperature: 0℃~+50℃ |
Humidity: 10%~90%(non-condensing) | |
Storing Condition | Temperature: -30℃~+60℃ |
Humidity: 10%~90%(non-condensing) | |
Power Supply | DC 12V/1A |
Power Consumption | ≤6W |
Dimension | 155mm×92mm×34mm(L×W×H) |
Net Weight | 0.24Kg |
4. Panel lights Introduction
Pilot Lamp | Status | Description |
PWR | On | The device is powered up. |
Off | The device is powered down. | |
PON | On | The device has registered to the PON system. |
Blink | The device is registering the PON system. | |
Off | The device registration is incorrect. | |
LOS | Blink | The device doses not receive optical signals. |
Off | The device has received optical signal. | |
SYS | On | The device system runs normally. |
Off | The device system runs abnormally. | |
INTERNET | Blink | The device network connection is normal. |
Off | The device network connection is abnormal. | |
WIFI | On | The WIFI interface is up. |
Blink | The WIFI interface is sending or/and receiving data (ACT). | |
Off | The WIFI interface is down. | |
FXS | On | Phone has registered to the SIP Server. |
Blink | Phone has registered and data transmission (ACT). | |
Off | Phone registration is incorrect. | |
WPS | Blink | The WIFI interface is securely establishing a connection. |
Off | The WIFI interface does not establish a secure connection. | |
LAN1~LAN2 | On | Port (LANx) is connected properly (LINK). |
Blink | Port (LANx) is sending or/and receiving data (ACT). | |
Off | Port (LANx) connection exception or not connected. |
4. Application
n Typical Solution:FTTO(Office), FTTB(Building),FTTH(Home)
n Typical Business:INTERNET,IPTV,IP Camera etc.
