CHONGQING GOHI MARINE EQUIPMENT CO., LTD. |
|
Product Introduction
SOLAS 15 Persons Diesel Engine Driven Water Jet Fast Rescue Boat is one high speed rescue boat whose speed can be over 30 Knots. It can be installed with 60HP, 90HP, 150HP outboard motors and 110-250KW diesel engines. Also it can load Max. 15 persons with one stretcher. For outboard motor driven fast rescue boat, it is usually launched by single arm slewing davit and diesel engine driven fast rescue boat is usually launched by “A” type davit which is driven by hydraulic winch with a very fast lifting speed. Also the fast rescue boat meets the SOLAS regulations and MED strictly and completely with Wheelmark and approved by the IACS class members.
SOLAS 15 Persons Diesel Engine Driven Water Jet Fast Rescue Boat is used for rescuing people in distress and assembling life rafts with good maneuverability. Vessels must be equipped with rescue craft as required for the safer and faster rescue of persons in distress.Normally the size of offshore rescue boat is 4.5m to 6.5m . Can be made as per different requirements.Diesel Engine Fast Rescue Boat is installed with a self righting air box, which could make Rescue boat self righting while capsized.Cruise Ship Rescue Boats using an anti-slip surface on the deck,stainless steel handrails are arranged on the both gunwale to keep security.The Fender could absorb the impacted energy, effectively protect the body from damage.
The fast rescue boat can be equiped with outboard motor, inboard diesel engine with water jet propulsion. The capacity range is 3-15 persons.
And the launching davit can be single arm slewing davit and "A" type davit. All the FRC fast rescue boats are approved by CCS, BV, ABS, DNV-GL, EC, MED, RMRS, IRS etc. It meets the latest SOLAS regulations.
Main Model
Type | Main Dimensions | Capacity | Speed | Total Weight | Engine |
GH60RB | 6.0*2.2*1.05m | 15P | ≥20knots | 2418kg | Mercury 60HP Outboard |
GH60RA | 6.0*2.2*1.05m | 15P | ≥20knots | 2720kg | Diesel Engine |
GH65KR | 6.5*2.2*1.05m | 15P | ≥27knots | 2646kg | Mercury 160HP |
GHB65Q | 6.8*2.45*0.9m | 9P | ≥20knots | 2193/2493kg | Mercury/Diesel Engine |
GHB78Q | 7.88*2.9*0.78m | 15P | ≥32knots | 3502kg | Inboard Diesel Engine |
Product Feature
In order to alleviate the damage caused to the hull by the
squeezing and collision of the fast rescue boat during the
departure maneuver, rubber fenders made of rubber materials are
embedded around the sides of the fast rescue boat hull. There is a
bow cable release device at the bow of the fast rescue boat, and a
cable pile is set on the left and right sides of the stern of the
fast rescue boat, mainly used for towing and assembling rescue
boats. In the fast rescue boat structure that uses a single arm
davit for lowering and retrieving operations, there is one bow
davit and two stern davits, forming three points that converge into
one point for controlling lifting and lowering operations. A hand
operated drainage pump is installed at the tail of the fast rescue
boat to facilitate the timely discharge of accumulated sewage
inside the boat. The sewage accumulated inside the boat is
discharged outside the boat through the drainage pipe system of the
drainage pump. There is a drainage outlet at the lowest point in
the stern of the rescue boat, which is convenient for the natural
flow and discharge of accumulated water inside the boat to the
outside during navigation or other situations. The bottom plug of
the rescue boat is set at the lowest point at the rear of the
rescue boat. When the rescue boat is out of water, the bottom plug
is opened to facilitate the drainage of water inside the boat. At
the tail of the rescue boat, there is a foldable fixed boarding
ladder made of aluminum alloy, which is convenient for underwater
personnel to board the boat. Lifesaving handropes are convenient
for underwater personnel to use when waiting for rescue or
assisting in climbing rescue boats.