Active Member
|
[China]
Contact name:
Shen Zhen Xin Hui Li Industrial development co. LTD |
|
|
Application : Connect with production line on glue potting machine
Operating principle:
1, program editing: material compilation, and Chen cases can be
2. Store the edited program and call out similar products.
3. Glue pouring head movement, pump body (driven by stepping motor)
for glue supply
4, trajectory: straight line, curve, point, box, circle, W type,S
type, can walk arbitrary irregular trajectory
5, z-axis up and down movement using ball shaft screw rapid
response.
Parameter
| 1 | Glue Ratio | 10:1 to1:1 Can be adjust in this ratio |
| 2 | Stirring Method | Dynamic stirring |
| 3 | Machine route | 680*680*100MM (can be customized ) |
| 4 | Work table | Work table:1050*900mm,effective work squre680*680mm |
| 5 | Programming method | Teaching programming |
| 6 | External dimension | 3000*1350*1500MM |
| 7 | Pump A | 9cc/turn (Taiwan) Screw Pump |
| 8 | Pump B | 2.4cc/turn (Taiwan) |
| 9 | Supply Glue power | Stepping motor |
| 10 | Glue Barrel Volume | A:25L With thermostat ,B:10L |
| 11 | Squeeze glue volume | 2-10g/s |
| 12 | Squeeze Glue Nozzle | Single with standard , can be customized multi nozzle |
| 13 | Input air pressure | 0.5-0.7Mpa |
| 14 | Power | 2000W |
| 15 | Voltage | AC220V±10%,50-60HZ |
Device Configuraion:
| 1 | Control System | PLC+ SCM +7.2 inch touch screen |
| 2 | Software System | Independent research and development, English interface |
| 3 | Stepper motor | YAKO independent research and development |
| 4 | Cut-off System | Independent research and development manufacturing |
| 5 | Mixing Arrangement | Independent research and development manufacturing |
| 6 | Cleaning System | Gas-liquid Cleaning |
| 7 | Rack Material | Steel Structure |
| 8 | Slide Parts | A3*3mm Independent research and development manufacturing |
Machine Efficiency
| 1 | English Operate interface | Anti-dumbing-type operation program design, simple operation,
practical, ordinary workers can learn in 5 minutes |
| 2 | Import electronic control system | Main electrical wiring, dust, anti - static, are up to foreign
standards |
| 3 | Glue Volum testing feedback function | The glue drum is equipped with the function of low liquid level alarm |
| 4 | Four times protection of glue filtration | Filter protection measures, reduce the mechanical pump failure probability, prevent the impurities in the glue into the glue pipe |
| 5 | Big work table | Can be placed at the same time multiple products, automatic continuous operation of the machine, with higher efficiency |
| 6 | The equipment runs more smoothly | The overall frame is made of super thick and stable material, which can effectively solve the shaking of the machine body when the machine moves at high speed and improve the production stability and precision |
| 7 | High precision mechanical pump body | Precision adjustment wear resistant |
| 8 | Fully automatic mechanical stirring | The mixing speed of AB glue can be adjusted from 0 to 3000rpm by dynamic and mechanical stirring |
| 9 | High precision operation | HIWIN linear sliding track and high-precision balance block are adopted to ensure the working accuracy |
| 10 | Glue barrel heating | Imported high quality and reliable safety coefficient of silica gel sheet heating, super protection |
Machine Feature
1. Accurate positioning, high precision and small operation error:
adopt high-precision sliding track and high-precision balancing
device.
2.powerful electric control system: the use of imported original
motor, panasonic PLC, touch screen, electronic components, wiring,
dust, anti-static system are designed in accordance with national
standards.
3.glue preparation: high precision gear pump, give full play to its
advantages, large amount of glue supply, high proportion of glue
ratio of a new technological breakthrough.
4. Glue level alarm function of A and B: it can prevent glue
breaking in time.
5. Original timing glue discharging system: prevent the temporary
stop of glue pouring during shift change and rest. After the glue
operation time, the glue curing of the mixing system will result in
infinite delay of operation time.
6. Glue quantity monitor of B glue curing agent: prevent the dry
glue problem caused by B glue breaking.
7. Multiple filtration system: multiple filtration is adopted from
the rubber barrel to the rubber head to prevent impurities from
entering the rubber barrel and causing pump jam.
8. Heating device can be added, equipped with glue A stirring
equipment to prevent precipitation.
9. Automatic cleaning system: the machine adopts the method of
liquid separation and packaging, only mixing at the glue outlet
head, automatic cleaning after use, quick and convenient operation.
10. Integrated design of glue dispensing and pouring, with
automatic operation.
11. Easy to operate, can store 10 sets of parameters, call out
product parameters during production, press the start button.
The glue suitable for double-liquid glue pouring machine:
Suitable for all kinds of two-component glue, such as double-liquid
glue, AB glue, silica gel, epoxy resin, PU glue and so on.
Accept customized machines with your required size and function.
Service : Free testing , One year Warantee ,and lifetime Service .
