|
[China]
Trade Verify
Address: No.5616th, Caoan Road, Jiading District, Shanghai
Contact name:Clarke Wang
Shanghai Glomro Industrial Co., Ltd. |
|
Verified Suppliers
|
|
|
Needle flame and horizontal vertical test machine
Product introduction
SPZY-2 horizontal and vertical and needle-flame combustion machine, which fully meets the national standard and related new UL and IEC standard equipment, is the only original instrument on the market that neutralizes two different test methods. In addition to the great originality of the device itself, the instrument auto-ignites and automatically counts time. At the same time, the horizontal and vertical combustion pattern clips are controlled by the motor and can be automatically moved up and down or left and right without artificial hand dialing.
Technical parameters
Needle flame section
| Needle burner | internal hole 0.5mm ± 0.1mm, outside diameter ≤ 0.9mm, length ≥ 35mm |
| Burner flame angle | 0-45° (arbitrary adjustment) |
| Burning time | 0-999.9s ± 0.1s can be adjusted freely (Automatic flame advance and retreat, no hands-on operation) |
| Holding time | 0-999.9s ± 0.1s, automatic recording, manual pause |
| needle height | greater than 35mm (inner diameter 0.5, diameter 0.9) |
| Combustion gas | 95% butane gas (bottled liquefied petroleum gas may be used) |
| Temperature test range | 0~1000°C |
| Flame temperature requirement | time from 100°C±2°C to 700°C±3°C within 23.5 seconds±1 second |
| Temperature thermocouple | 0.5mm imported armored (K type) thermocouple |
| Heat transfer copper block | 4.0x6.0mm |
Horizontal vertical test section
| Ambient temperature | room temperature ~ 40 °C; Relative humidity: ≤ 75% |
| Supply voltage and power | 220V±10% 50HZ power 150W |
| Bunsen burner automatic ignition time | any setting |
| Bunsen burner inner diameter | 9.5mm±0.5mm |
| Air source | Liquefied petroleum gas (industrial methane gas during arbitration) |
| Flame spraying time | 0~999.9S (adjustable) |
| After flame time | 0~999.9S (adjustable) |
| Residual time | 0~999.9S (adjustable) |
| Burning angle | 0°, 20°, 45° selectable |
| Flame height | 20mm ~ 175mm adjustable |
| Flame temperature | (100-1000) °C adjustable |
| Gas flow | Adjustable gas flow rate 105ml/min-1000ml/min |
| Time Devices | Accurate to 0.5S |
Design criteria
Horizontal vertical burning test part design GB: GB-T2408-2008 "Plastic combustion performance test - horizontal method and vertical method"
Horizontal vertical burning test section applicable standards: UL94-2006, GB-T 5455, GB-T13488, GB-T5169IEC60695-11-3, IEC60695-11-4, IEC60950-1, IEC695-2
Needle flame test equipment National standard: GB5169.5-2008 Fire hazard test for electric and electronic products Part 5: Test flame Needle flame test method Apparatus and confirmation test
GB4706.1-2005 General requirements for safety of household and similar electrical appliances
1. Aluminium box and carton box, careful and tight package, make sure the package is intact
2. The package will be shipped by DHL/Fedex/TNT/EMS/UPS/China post/EF-Express/Special line, as you have chose in the order.
Our Services
If you encounter with any problems during the testing process,we promise providing urgent guidence and after-sales sevice within 48 hours and solution providing within 3 working days. If customers require on-site service, the transport and travel expense shall be responsible for the cost.
1. Pre-service
24 Hours online service for customers' consultation.
2. Middle service
--Fullfill customer's request:
--Payment method depends on customer.
--Promptly production and delivery
--Can provide invoice value if you want to decrease your tax.
3. After sale service
--One year warranty service and all life maintenance.
--Technical Egineer are avalible for oversea trainning.
--Remote control technical consult
Shanghai Glomro Industrial Co., Ltd was founded in 2012.
Specializing in the production of testing equipment and industrial
measurements and instruments products. Products of high quality,
fashionable, widely used in a variety of industrial areas, not only
has the broad masses of the domestic sales market, but also
exported to Europe and the United States.
Glomro hinge over the years has always adhered to "quality of
products in order to survive, credibility and development services"
business purposes. Committed to providing you with high-quality
products and quality services. Have a professional, dedicated
design management team, from product design, mold making, molding
to the Product assembly, for each aspect and processes are
rigorously testing and control.
Over the past few years of production and management and exploration, Longtai set up its own quality management system. Industry standards including SAE,IEC JEDEC,ASTM and MIL-STD,ISO:9001,UL,CE certified. Glomro always implement the concept of customer value creation for customers tailored products to meet the needs of different customers, and continuously provide customers with solutions to technical problems,further exploration innovation,and excellence.
Warmly welcome you and opening up the boundaries of communication. We synchronize with your ideal partner!
FAQ
Q:Are your company a trading one or a factory?
A:Factory + trade (integration),More than 10 years focusing on test instruments field,6 years exporting experience.
Q:After an order is placed, when to deliver?
A:Generally about 10-25days, If we have inventory, we can arrange shipment within 3 days. Please be aware that our production lead times depend on specific items and item quantities.
Q:What about the warranty with after - sales services?
A:The testing machine is guaranteed for 12 months by Shanghai Glomro Building Industrial Co.Ltd ,One year promise including free maintenance and changing Instrument components.Besides, Full-life cycle technical support is provided.
Q:What about the product' services and quality?
A:Each instruments must be carried out 100% quality examination and test when shipping and delivery goods. each of our product provide video training to show you how to install & operate. We can arrange engineer to train the operation of equipment to customer’s company when you need.
