Active Member
|
[China]
Address: Rm 604 Bldg 9th Yinxingyuan South Rd Nanshan District 518054 Shenzhen China
Contact name:Yvone Si
Shenzhen Hicorpwell Technology Co., Ltd |
|
|
Multimode150 M MM DX Patch Cord Cable Armoured OM3 Jumper Patch Cable
Armored fiber patch cable use rugged shell with aluminum armor and kevlar inside the jacket,
and it is 10 times stronger than regular fiber patch cable.
This will help make the armored fiber patch cord resistant of high tension and pressure.
The armored patch cable has a 40% higher rated range of operating temperature, so it provides stable
performance over a wide temperature range.
This type patch cable is specifically ideal for light to medium duty indoor/outdoor applications.
We can supply armored fiber optic patch cable, including 10G OM4/ OM3, 9/125, 50/125, 62.5/125 fiber types.
The armored fiber optic patch cords can be with SC, ST, FC, LC, MU, SC/APC, ST/APC, FC/APC,
LC/APC, etc. types of terminations.
Description:
A patch cord is a fiber optic cable used to attach one device to another for signal routing. Normally, there are 4 types connector: FC/SC/LC/ST.. 3types ferrule: PC, UPC, APC…
PC stands for Physical Contact.With the PC connector, the two fibers meet as they do with the flat connector, but the end faces are polished to be slightly curved or spherical. This eliminates the air gap and forces the fibers into contact
UPC stands for Ultra Physical Contact.The end faces are given an extended polishing for a better surface finish. These connectors are often used in digital, CATV, and telephony systems.
APC stands for Angled Physical Contact The end faces are still curved, but they’re angled at an industry-standard eight degrees. This maintains a tight connection. These connectors are preferred for CATV and analogue systems.
LC patch cord is a fiber optic cable used to attach one device to another for signal routing.
LC stands for Lucent Connector. It is a small form-factor fiber optic connector, half the size of the SC.
II. Features:
Complying with IEC, Telcordia GR-326-CORE, YD-T
1272.3-2005,standard.
Low insertion loss, high return loss
High dense connection, easy for operation
High credibility and stability
Good in repeatability and exchangeability
III. Application:
Testing equipment
FTTX+LAN
Optical fiber CATV
Optical communication system
Telecommunication
| Parameter | Unit | LC/SC/ST/FC | |||
| SM(9/125) | MM(50/125 or 62.5/125) | ||||
| PC | UPC | APC | PC | ||
| Insertion Loss | dB | ≤0.3 | ≤0.2 | ≤0.3 | ≤0.2 |
| Return Loss | dB | ≥45 | ≥50 | ≥60 | ≥35 |
| Exchangeability | dB | ≤0.2 | |||
| Repeatability | dB | ≤0.2 | |||
| Durability | Time | >1000 | |||
| Operating Temperature | °C | -40~75 | |||
| Storage Temperature | °C | -45~85 | |||
| Connector | End A | Fiber Optic Connector | |||
| End B | LC,or SC,FC,ST...... | ||||
| Cable Diameter(mm) | 4.0mm/ 7.0mm/ 8.0mm | ||||
| Material of jacket | TPU | ||||
| Fiber Core | 4,8,12 or specified | ||||
| Mode | Singlemode | Multimode | |||
| Operating Wavelength(nm) | 1310/1550 | 850/1310 | |||
| Polishment | UPC | APC | UPC | ||
| Insertion Loss(Max.dB) | 1.5 | 1.0 | |||
| Return Loss(Min.dB) | 50 | 35 | |||
| Mechanical Features | Plug | ≤1000N(main cable) | |||
| Socket | ≤100N(Branch cables) | ||||
| Grade | IP68 | ||||
| Mating time | 500 Min | ||||
| Durability(Max.dB) | 0.2 | ||||
| Reaptability(Max.dB) | 0.5 | ||||
| Operating Temperature(℃) | -40~+85 | ||||
| Storage Temperature(℃) | -40~+85 | ||||
