LC / UPC OM2 Duplex 3.0mm PVC Duplex Patch Cord , 3m / 5m LC FC SC ST SM Fiber Optic Cable

LC/UPC-LC/UPC OM2 Duplex 3.0mm PVC Patch Cable Patch Cord 3m/5m 

Description:

OM2 50/125 LC to LC UPC Fiber Patch Cords

• 50/125 OM2 Multimode fiber is crafted and created for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, OM2 legacy, Local Area Networks, SAN, backbone, riser, and horizontal applications. Also, used for Patch panels adapters. It supports video/data/voice services.

• This fiber conforms to ITU-T G.651.1, also know has G.651.1 graded fiber. TIA/EIA 492AAAB and IEC60793-2-10 A1a.1a specs and meet with RoHS regulations.

• OM2 Fiber has an orange color jacket according to TIA specs. With a 3.00 mm jacket diameter. OM2 cables have a 500 MHz-km bandwidth and a 2.3dB/km MAX attenuation at 850 nm LED /Light sources and a 500 MHz-km bandwidth and a 0.6dB/km MAX attenuation at a 1300 nm wavelength.

• OM2 fiber patch cords operate at a recommended spectrum of temperature: (-4°F to +158°F) and have a MIN Install Bend radius of 5.00 cm and a MIN long-term Bend radius of 3.00 cm.

• OM2 patch cords are suitable for SFP requiring 50/125 multimode cores, is still used in a lot of applications.

• OM2 50/125 Multimode fiber patch cords reduce the installation process and minimize the total cost of installation, due to pre-terminated fiber intrinsic plug-and-play feature.

• Multimode Fiber is immune to many environmental factors, such as Electromagnetic and Radio-Frequency Interference, so it is possible to install fiber patch cables next to industrial equipment without any problem.

• LC Duplex connectors come with a conjoined clip for holding together the two fibers, is easily removed with a flat screwdriver

A patch cord is a fiber optic cable used to attach one device to another for signal routing.

Normally, there are 4 types connector: FC/SC/LC/ST.. 3types ferrule: PC, UPC, APC…

LC patch cord is a fiber optic cable used to attach one device to another for signal routing. LC stands for Lucent Connector.

It is a small form-factor fiber optic connector, half the size of the SC.

PC stands for Physical Contact.With the PC connector, the two fibers meet as they do with the flat connector,

but the end faces are polished to be slightly curved or spherical. This eliminates the air gap and forces the fibers into contact

UPC stands for Ultra Physical Contact.The end faces are given an extended polishing for a better surface finish.

These connectors are often used in digital, CATV, and telephony systems.

APC stands for Angled Physical Contact The end faces are still curved, but they’re angled at an industry-standard eight degrees.

This maintains a tight connection. These connectors are preferred for CATV and analogue systems.

Features:

Complying with IEC, Telcordia GR-326-CORE, YD-T 1272.3-2005,standard.
Low insertion loss, high return loss
High dense connection, easy for operation
High credibility and stability
Good in repeatability and exchangeability

Cable Jacket: