Active Member
|
[China]
Address: FLAT/RM A 12/F KIU FU COMMERCIAL BLDG 300 LOCKHART ROAD WAN CHAI HK
Contact name:Andy
SENYDA(HK)Technology Limited |
|
|
Original Gigabit Router Module ASR1000-RP1 Cisco ASR1000 Series
Product Information
The Cisco ASR 1000 Series Route Processors address the stringent route-processing requirements of carrier-grade IP and Multiprotocol Label Switching (MPLS) packet network infrastructures. They are the central control processors that run the network operating system, provide advanced routing capabilities, and also monitor and manage the other components of the Cisco ASR 1000 Series Aggregation Services Router.
| Device Type | Router |
| Enclosure Type | Plug-in module |
| Feature | VPN support, MPLS support, IPv6 support, Stateful switchover (SSO), MPLS VPN |
| Capacity | IPv4 routes : 1000000 |
| IPv6 routes : 250000 | |
| Dimensions (WxDxH) | 42.8 cm x 36 cm x 2 cm |
| Designed For | ASR 1004, 1006 |
More Details
Table below shows more informations.
Performance | |
Up to 25 Mpps | Variable forwarding performance, depending on features configured |
Bandwidth | |
Up to 40 Gbps | For the combination of commonly used features + Firewall or NAT |
Shared by all Cisco ASR 1000 SIP (ASR1000-SIP10 or ASR1000-SIP40)
cards | |
Up to 12.9 Gbps | For plain IPsec encryption (1400-byte packets) |
Scaling | |
Access control | Up to 4,000 unique ACLs and 100,000 ACEs per system |
Broadband | Up to 64,000 sessions and 16,000 L2TP tunnels |
IP
| Up to: |
● 4,000,000 IPv4 or 4,000,000 IPv6 routes | |
Multicast: 100,000 routes and 4,000 groups | |
QoS | Flexible number of queues per system: |
● Up to 128,000 queues | |
● Three levels of hierarchy 8-kbps policing and queuing granularity <100-microsecond latency for high-priority applications | |
Related Products
Table below describes features and benefits of the Cisco ASR 1000 Series RP1, RP2, RP3, and built-in RP of the ASR 1001, 1001-X, 1002, 1002-F, and 1002-X.
| Feature | Description |
| Support for Cisco IOS XE Software | Supports a breadth of IP network services, including quality of service (QoS), MPLS, Layer 2 virtual private network (L2VPN), Layer 3 virtual private network (L3VPN), Application Visibility and Control, Performance Routing (PfR), AppNav infrastructure, Data Center Interconnect, Crypto and IPv6 |
| High availability | Provides optional redundant-processor support and dual Cisco IOS Software support for single-route- processor solutions for a highly compact, fully redundant, high-availability solution |
| Stratum-3 clock circuitry and BITS input ports | Facilitates support of clocking for synchronous services such as SONET and SDH. BITS input ports are available on RP1, RP2 and ASR1002-X only. |
| Memory scalability of up to 16 GB up to 64 GB for RP3 | Allows pay-as-you-grow scalability so memory can increase as you add more users or features; the scalability offered through memory upgrades includes: |
Routing-table growth | |
Additional MPLS VPN routing and forwarding instances | |
Feature additions such as SBC and broadband aggregation (BBA) | |
| Solid state drive support | Allows for greater storage area for code storage, boot, configurations, billing, logs, etc. |
| USB compact flash support | Allows for easier manageability for code storage, boot, configurations, logs, etc. |
| Modularity | Offers maximum investment protection and flexibility by allowing customers to upgrade to future Cisco ASR1000 Series Route Processors |
| Note: Cisco ASR 1002,and ASR1002-F have an integrated RP1 built into the chassis that is not upgradable. | |
| Note: Cisco ASR 1001, ASR 1001-X, and ASR 1002-X (part numbers ASR 1001, ASR 1001-X, ASR 1002-X) have an integrated RP2 built in to the chassis that is not upgradable. |
