Square CuAg CuCrZr Copper Mould Tube Low Pressure Loss Con Cast
Machine
Product Introduction
In order to solve the problem of contact and separation
between the copper tube and the cooled green shell during the
working process, the copper tube of the die is still a square or
rectangular copper tube with one side bent, the inner cavity of the
copper tube is conical from the upper opening to the lower opening,
and the inner cavity of the copper tube is conical, segmented
double conical or triple conical or multi conical, or parabolic
inner cavity from the upper opening to the lower opening, The upper
or upper taper is greater than the lower or lower taper.
Preferably, the taper of the straight surface is greater than that
of the arc surface. In the working process, the air gap between the
green shell and the inner wall of the copper pipe is avoided, which
is more in line with the change law of green shell shrinkage.
1. Design principle of inner cavity shape of mold copper tube of
high-efficiency billet caster
According to the solidification characteristics of continuous
casting billet, the inner cavity shape of mold copper tube of
high-efficiency billet caster was designed. Two problems are mainly
considered: one is the thermal deformation of mold copper pipe near
the meniscus due to high heat flux and heat concentration. The
second is shell shrinkage during solidification. The design
principle is to make the shape of the inner cavity of the die
copper pipe consistent with the shrinkage law of the solidified
shell, so as to reduce the air gap thermal resistance.
2. Main characteristics of copper pipe material for high efficiency
continuous casting mold
High efficiency continuous casting requires good thermal
conductivity, high recrystallization temperature, thermal fatigue
resistance, high strength, good wear resistance and long service
life. The main characteristic of high efficiency continuous casting
mold copper pipe material is that the comprehensive performance of
copper pipe material is the best.continuous casting mold material
are good thermal conductivity, high recrystallization temperature,
thermal fatigue resistance, high strength, good wear resistance and
long service life. The main feature of high-efficiency continuous
casting mold copper pipe material is that the comprehensive
performance of copper pipe material is the best.
Product features
1, Our company can design the best internal geometry for customers
according to the actual situation of steel making, and ensure
better use effect and competitive cost performance.
2, Our company has designed the maximum heat transfer rate from the
meniscus to the bottom of the copper tube.
Parameters
Copper Mould Tube | Size (mm) | Thickness (mm) | Length (mm) | Radius (mm) | Design or Taylor-Made |
ODM & OEM |
Billet Square | 50x50 - 680x680 | 6 - 80 | 600 - 1250 | 3000 - 17500 | Exactly follow your drawing and requirement |
Copper Mold Tubes | or straight |
Bloom Rectangle | 50x50 - 680x680 | 10 - 80 | 600 - 1250 | 3000 - 17500 | Exactly follow your drawing and requirement |
Copper Mould Tubes | or straight |
Slab Copper Mold Tube | 50x50 - 680x680 | 6 - 80 | 600 - 1250 | 3000 - 17500 | Exactly follow your drawing and requirement |
or straight |
Beam Blank Mould Tube | 550-150 x 120-70 | 12 - 80 | 600 - 1250 | 3000 - 17500 | Exactly follow your drawing and requirement |
or straight |
Application
Copper mold tubes are widely used in continuous casters. The main
function of copper mold tube is to solidify the molten steel to the
required size and shape.