|
[China]
Trade Verify
Address: No.1 Yunan Road, Guangzhou Civilian Science & Technology Park, Taihe, Guangzhou, China.
Contact name:Kris
GUANGZHOU BAIYUN TECHNOLOGY CO., LTD. |
|
Verified Suppliers
|
|
|
BAI YUN® SS550 Neutral Silicone Sealant 300ml Black/White/Grey Windows Doors GP
BAI YUN® SS550 Neutral Silicone Sealant
Features
Apply at the temperature between 4-40°C. Easy to operate
Neutral curing, non-corrosive curing system
No unpleasant odor during cure
Excellent resistance to weather, UV, ozone, water
Good adhesion to most common building material without priming
Good compatibility with other neutral silicone sealants
Composition:
One-part, neutral-curing
RTV silicone sealant
Application:
Sealing joints for all types of doors and windows
Sealing in joints of glass, metal, concrete and etc
Many other uses
Typical Properties
| Property | Result | Test method |
| Uncured-As Tested at 23°C (73°F) and 50% RH | ||
| Specific Gravity | 1.50 | ASTM D1475 |
| Working time(23°C/73°F, 50% RH) | 10-20minutes | |
| Tack-free time(23°C/73°F, 50% RH) | 60 minutes | ASTM C679 |
| Curing time(23°C/73°F, 50% RH) | 7-14 days | |
| Flow, Sag or Slump | ＜0.1mm | ASTM C639 |
| VOC Content | ＜39g/L | |
| As Cured-After 21 days at 23°C (73°F) and 50% RH | ||
| Durometer Hardness, Shore A | 20-60 | ASTM C661 |
| Peel Strength | 28lb/in | ASTM C794 |
| Joint Movement Capability | ±12.5% | ASTM C719 |
| Tensile Adhesion Strength | ||
| AT 25% extension | 0.275MPa | ASTM C1135 |
| AT 50% extension | 0.468MPa | ASTM C1135 |
| Specifications: Typical property data values should not be used as specifications. Assistance with specifications are available by contacting Guangzhou Baiyun Chemical Industry CO., LTD. | ||
Applicable Standards:
·GB/T 22083 Class 12.5
·ISO11600-F-12.5E
·ASTM C920; Type S, Grade NS, Class 12.5, Use NT, A, G, M, O
Colors:
Black, gray and white (standard colors)
Other wide variety of colors (customized)
Package:
300 m cartridge and 590 ml sausage
Storage and shelf life:
12 months from the date of manufacture when stored at or below 27ºC (80ºF) in the original unopened containers.
Product limitation:
This product should not be used, applied or recommended:
In structural glazing applications or where the sealant is intended as an adhesive.
In areas where abrasion and physical abuse are encountered.
In totally confined spaces as the sealant requires atmospheric moisture for cure.
On frost-laden or damp surfaces
To building materials that bleed oils, plasticizers or solvents – materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets or tapes.
In below-grade applications.
On concrete and cement substrates.
On substrates made of polypropylene, polyethylene, polycarbonate and poly tetrafluoroethylene.
Where movement capability greater than ±12.5% is required.
Where painting of the sealant is required, as the paint film may crack and peel
For structural adhesion on bare metals or surfaces subject to corrosion (i.e., mill aluminum, bare steel, etc.)
To surfaces in contact with food
For use underwater or in other applications where the product will be in continuous contact with water.
Handling and Safety:
Product safety information required for safe use is not included in this document. Before handling, read product and material safety data sheets and container labels for safe use, physical and health hazard information. the material safety data sheet is available from baiyun sales application engineer, or distributor, or by calling baiyun customer service.
How to use:
Complete design and installation guidelines are contained in the BAI YUN Technical Manual when using this product
Health and environment information:
For information and advice regarding transportation, handling, storage and disposal of chemical products, users should refer to the actual Material Safety Data Sheets containing physical, ecological toxicological and other safety-related data.
