|
[China]
Trade Verify
Address: No.1 Yunan Road, Guangzhou Civilian Science & Technology Park, Taihe, Guangzhou, China.
Contact name:Kris Ke
GUANGZHOU BAIYUN TECHNOLOGY CO., LTD. |
|
Verified Suppliers
|
|
|
BAI YUN®SMP651 Silane Modified Polyether Sealant ±25% movement capability, exhibit stable performances
Features:
Environmental friendly: low VOC, nonpoisonous, no staining or corrosion to substrate.
Excellent workability: single component, good extrusion between 4~40℃, very easy to tool.
Outstanding adhesion: bond to most construction materials without primes.
Movement Capability:±25%, exhibit stable performances during normal shape change from stretch and shearing of joint inside the constructions.
Excellent physical properties: Excellent weather resistance, excellent resistance to aging.
Applications:
Sealing of building joints or cracks for indoors decoration(ceiling, kitchen, windows, walls).
Technical characteristics:
Property | Result | Test method | |
|---|---|---|---|
| Tack-Free Time(min) | 30~60 | ASTM C679 | |
| Specific Gravity(g/cm3) | 1.40~1.60 | ASTM | |
| Hardness(Shore A) | 10~30 | ASTM C661 | |
| Joint Movement Capacity(%) | ±25 | ASTM C920 | |
| Adhesion and Cohesion under Cyclic Movement | No failure | ASTM C719 | |
| Adhesion-in-Peel | Use Aluminium Peel strength | 122N | ASTM C794 |
| Use Mortar Peel strength | 114.5N | ||
| Adhesion-in-Peel Exposed to UV(200h) | Use Glass Peel strength | 109.8N | |
| Effects of Accelerated Weathering(250h) | Appearance | No cracks | ASTM C793 |
| Bend test(-26℃) | No cracks | ||
| Shelf Life(month) | 12 | ||
Product limitation:
This product should not be used, applied or not recommended:
In conditions above 80℃.
In structural glazing applications.
In totally confined spaces as the sealant requires atmospheric moisture for cure.
In applications for immersion or always wet conditions.
On substrates that can extrude grease, plasticizer or solvent.
On substrates made of polypropylene, polyethylene and polytetra fluoroethylene.
Technical services:
Complete technical data and adhesion/compatibility tests are available from Guangzhou Baiyun Chemical Industry CO., LTD.
Staining test service is also provided for clients. Clients can send the substrates to us by mail(or other ways), then we will carry out the staining test and give the test report.
Storage and shelf life:
12 months from date of manufacture when stored at or below 27ºC (80ºF) in the original unopened containers.
Repairs:
Repairs should not be needed in ordinary situations. If sealant is damaged and needs repairs, please remove damaged parts and clean surfaces with isopropyl alcohol, then seal the damaged region with this product. SMP651 silane modified polyether sealant for prefabricated construction can firmly bond to cured silane modified polyether sealant.
Package:
590 mL sausage
Colors:
Black, gray and white (standard colors)
Other wide variety of colors (customized)
Directions for use:
Before embarking on any work involving SMP651 silane modified polyether sealant for prefabricated construction, the safety data sheet should be carefully studied by those carrying out the work.
All surfaces must be structurally sound, clean, dry and free of oil, grease, asphalt, and any loose particles.
Mask adjacent surfaces. Install approved backing material where necessary.
Cut the nozzle to the required diameter.Apply sufficient sealant into joint sides to ensure complete contact
Tool in 10 minutes. Remove masking immediately after tooling.
Keep good ventilation during construction and cure.
To confirm optimum adhesion on either a porous or nonporous surface, adhesion testing should always be carried out prior to the commencement of any project and be carried out at regular intervals during the project.
Cautions:
Avoid eye contact with uncured sealant, especially children. In case of eye contact, flush eyes with water or obtain medical attention immediately.
Specifications:
ASTM C920 Class 25
