Active Member
|
[China]
Address: 301-64 Hexin Road, High-Tech District, Chengdu 610000, China
Contact name:Cai Qiang
Jigren Systems Co.,Ltd |
|
|
24.0L Powerpack for Natural Gas, Biogas and Natural Gas Engines
Descriptions
1. Original MAN base engine
2. The base engine technology is mature, with high power density,
high thermal efficiency and low emission
3. Specific improvements for gas fuel, solid and durable,
especially design for operation under high load
4. A wide range of fuels are applicable: natural gas, biogas,
landfill gas, sewage methane, etc
5. Strong adaptability: it can operate reliably from - 40 ℃ to 55
℃, with low-temperature starting capability and high success rate
6. Advanced electronic control fuel system of continuous flow,super
durable design, especially resistant on dry and dirty gas
7. Self adaptive and self-learning abilities on
gas composition
8. CDI 2.0 high energy ignition system,ignition energy up to 400 ~
600 MJ
9. Closed-loop control on fuel
10. Electronic speed governing
11. Support CAN J1939 communication
12. SAE flywheel housing and flywheel
13. With after-treatment, it can meet emission standard Tier 4
| No. | Items | Technical Parameters |
| 1 | Engine Model | M32572 |
| 2 | Bore×Stroke | 132×157 mm |
| 3 | Gas Cylinder NO. | 12-V-90°included angle |
| 4 | Displacement | 25.8 L |
| 5 | Compression Ratio | 11.5:1 |
| 6 | Gas intake Pressure | 3～15/450～700 kPa |
| 7 | Cooling Method | Water Cooling |
| 8 | Aspiration Method | Turbocharged Intercooler |
| 9 | Standard Gas Intake Temp. | 25°C |
| 10 | Low Idle | 650 r/min |
| 11 | Direction of Rotation | Counter-clockwise viewed on flywheel |
| 13 | Efficiency | 40% |
| 14 | Dimensions | 1748×1243×1500 mm |
| 15 | Net Weight | 1849 Kg |
| 1500rpm | |||
| Fuel | kWm | HP | kWe for COP |
| Natural Gas | 550 | 745 | 500 |
| Biogas | 550 | 745 | 500 |
| 1800rpm | |||
| Fuel | kWm | HP | kWe for COP |
| Natural Gas | 580 | 786 | 500 |
| Biogas | 580 | 786 | 500 |
| Power values are in accordance with standard ISO 3046-1.kWm values are based on a calorific fuel value for 10kWh/Nm³ for natural gas and 6kWh/Nm³ for biogas and 30kWh/Nm³ for LPG and 4kWh/Nm³ for syngas . kWe values are based on standard assumptions for mechanical and electrical losses. these values are provided for information purposes only and are non-binding.Ratings and performance are solely for reference only and subject to site conditions and JIGREN application and ratings guidelines. The product images shown are for illustration purposes only and may not be an exact representation of the final product. All information is subject to change without notice. | |||
