Iron Metal Hot Dip Galvanized Bolts , Half Threaded Galvanized Hex Head Screws

DIN 933 DIN931 Galvanized Hex Head Bolt Half Threaded DIN 933 Screw Class 8.8

Products Description:

1. The six angle bolt is a fastener consisting of fingers and screws. The bolts are divided into iron bolts and stainless steel bolts according to the material, namely the six angle head bolts (partial threads) -C and six angle bolts (full thread) -C level.

2. Six angle bolt: a fastener consisting of two parts, the head and the screw (the cylinder with external thread). It needs to cooperate with the nut to fasten and connect two parts with through holes.

This form of connection is called a bolt connection. If the nut is swirled down from the bolt, the two parts can be separated, so the bolt connection is a detachable connection.

3. In addition, there are special uses: T grooved bolts, the most commonly used machine tool clamps, the shape is special, and the sides of the head should be cut off. The anchor bolts are used to connect the machine to the ground, and there are many kinds of U bolts.

application

Any difference between the six hexagon head bolts can meet the specifications of fasteners, some high-tech equipment has strengthened the bolt parts processing technology, such as Chinese aviation equipment for bolt quality requirements are higher, because of the high quality of bolts can reduce the equipment failure rate and maintenance time, The advantage of acid tin plating is that the plating speed is faster. And the coating is bright and meticulous, deep plating ability. The plating solution has a strong tolerance to impurities, and the operation at room temperature is more energy saving.

Specification