Zhangjiagang City FILL-PACK Machinery Co., Ltd |
Verified Suppliers
|
Semi Automatic Plastic 5 gallon blow molding line for water bottling line
5 gallon blow molding line Main Features:
1) This machine uses a well-known brand PLC to control the machine,
which is easy to operate.
2) A total of 19 brackets to ensure capacity.
3) Each layer of lamp is independently controlled and suitable for
various preforms.
4) Control the temperature of the lamp to control the speed of the
entire heater.
5) The heater is equipped with a temperature control system. Make
the machine suitable for long hours of work.
6) 16-layer heating tunnel. A total of 34 lamps were heated.
7) The raw material of the mold is #45 steel or 7075 aircraft
aluminum. The surface is chrome plated to avoid rust.
5 gallon blow molding line Main Parameter:
Theoretical Output | pcs/h | 150 |
Max.container volume | L | 20 |
Max.neck diameter | mm | 200 |
Max.container diameter | mm | 300 |
Max.container height | mm | 520 |
Mould Thickness | mm | 260-410 |
Mould Stroke | mm | 330 |
Heat Lamp Amount | pcs | 25.6 |
Max.heating power | kw | 32 |
Power of Main Blower | kw | 26 |
Actual power consumption | kw | 16-20kw |
Working Pressure | Mpa | 0.8 |
Low pressure consuming | Ltr/min | 600 |
Blowing pressure | Mpa | 3.5 |
High pressure consuming | Ltr/min | 600 |
Measurement of Main Blower | mm | 2300*750*1860 |
Measurement of elevator | mm | 2280*700*1630 |
Weight of Main Blower | kg | 1500 |