Active Member
|
[China]
Contact name:Dennis
Hebei Mingmai Technology Co.,Ltd |
|
|
SWT - ZW3000 380V DVS Plastic Chemical Containers Sheet Bending Machine
Sheet Bending Machine Brief Introduction:
ZW series Sheet Bending Welding Machine are suitable for welding thermoplastic sheets made of HDPE, PP, PVC, PVDF.
The machine is designed according to DVS 2208, and can operate in compliance with the DVS 2207.
Sheet Bending Machine Specification:
| Specification/Size | SWT-ZW3000 |
| Weldable sheet thickness(mm) | 3.0-30.0 |
| Bending Angle(℃) | 40-150℃ |
| Air pressure (kg.f/c㎡) | 6.0-8.0 |
| Rated voltage(V) | 380V, 50/60Hz |
| Rated current(A) | 6A |
| Heating Power(KW) | 9KW |
| Rolling Motor Power(KW) | 1.5KW |
| External dimensions(L*W*H) mm | 4200*1800*1600 |
| Packing dimensions(L*W*H )mm | 4330*1900*1850 |
| N.W KGS | 1380kg |
| G.W KGS | 1500kg |
Operating Principle:
Heat bending of plastic plates . The plate can be heated on the heating table until it softens in the heated area, after which it is bent and held in a fixture while cooling. Fixtures can be made of MDF board or the like. Since subjects may be taken from the hot stage, immediately after the heating, the method is also suitable for large series. Hot bending may also take place in the hot bending machines, securing the plate during cooling,. This method is mostly used for individual pieces , where you do not want to manufacture fixtures. Most thermoplastics can be Heat Bending, very suitable are PMMA (acrylic), PC (polycarbonate), )and PVC (polyvinyl chloride),PP,PE,PVDF and etc.
Sheet Bending Machine Application:
International warranty:24months.
Any parts broken or does not work under normal operating,we are
free to provide.
