Yellow 250V 5x20 PCB Mount Fuse Holder PTF Fuse Terminal Block

250V 6.3A 5x20 PCB Mount Fuse Holder PTF Fuse Block Yellow Horizontal PCB Terminal

Product Description

Fuses are optional.

Fuse Block for 5 x 20mm Fuses

Widely used in household appliances, electric power, telecommunications, machine tools, ships, textiles, printing, mining machinery, Mustic instruments, etc.

Drawing of the PTF-10 fuse holder

Please allow 1-3mm tolerance due to manual measurement.

KEY WORDS: FUSE HOLDER. PCB FUSE HOLDER, 5X20 FUSE HOLDER, R3-45 FUSE HOLDER

5x20 glass fuses

5x20 ceramic fuses

In electronics and electrical engineering, a fuse is an electrical safety device that operates to provide overcurrent protection of an electrical circuit. Its essential component is a metal wire or strip that melts when too much current flows through it, thereby stopping or interrupting the current. It is a sacrificial device; once a fuse has operated it is an open circuit, and must be replaced or rewired, depending on its type.

Fuses have been used as essential safety devices from the early days of electrical engineering. Today there are thousands of different fuse designs which have specific current and voltage ratings, breaking capacity, and response times, depending on the application. The time and current operating characteristics of fuses are chosen to provide adequate protection without needless interruption. Wiring regulations usually define a maximum fuse current rating for particular circuits. Short circuits, overloading, mismatched loads, or device failure are the prime or some of the reasons for fuse operation. When a damaged live wire makes contact with a metal case that is connected to ground, a short circuit will form and the fuse will blow.

Applications

Electrical

Standard Package:

depends on the cable spec

Shipping Term:

EXW, DDU, DDP, C&F, FOB

Shipping Methods:

International Express, By Air, By Sea

Selection of the Fuse and Holder Solution

The first step is to answer the following questions:

• Will the fuse need to accessible for replacement?
• How often will the fuse need to be replaced?
• Should the end customer of the appliance have access to change the fuse?
• Should the fuse only be accessible from outside the appliance?
• How much is available to spend on safety and reliability?

5.1.2. Requirements and characteristics

The most important standards for fuse-holders, which specify requirements, characteristics and testing methods are:

• IEC-publication 257 (1968) and Amendment no. 2 to this publication dated January 1989.
• UL-standard no. 512.