Dongguan Tianrui Electronics Co., Ltd |
Verified Suppliers
|
|
Gas discharge tubes (GDT) use noble gasses enclosed in ceramic tubes to provide an alternate circuit path for voltage spikes. The ceramic envelope and with nickel connectors allow for high loads. 2RB-6SS Gas Discharge Tubes (GDT) series has a surge rating of 10kA, 8/20μs.Offered in a Squared Surface Mount package, which helps to make pick and place on PCB process easier.
This GDT series is perfectly suited for broadband equipment
applications. The GDT’s low off-state capacitance is compatible
with high bandwidth applications and this capacitance loading value
does not vary if the voltage across the GDT changes.
2RB-6SS Gas Discharge Tube (GDT) series are specifically designed
for protection of electrical, multimedia, and communication
equipment against over voltage transients in
surface mount assembly applications.
Part Number | DC Spark-over Voltage 1) 2) @100V/S | Impulse Spark-over Voltage | Insulation Resistance 3) | Capacitance @1MHz | Life Ratings | |||||||||||||||||||||||||||
Impulse Discharge Current @8/20μS | AC Discharge Current @50Hz 1S | Impulse Life @10/1000μS 100A | ||||||||||||||||||||||||||||||
100V/μS | 1KV/μS | |||||||||||||||||||||||||||||||
Max | Max | Min | Max | Nominal ±5 times | Max 1 time | Nominal 5 times | Min | |||||||||||||||||||||||||
V | V | V | GΩ | pF | KA | KA | A | Times | ||||||||||||||||||||||||
2R075B-6SS | 75±20% | 500 | 600 | 1 | 1.5 | 10 | 15 | 10 | 300 | |||||||||||||||||||||||
2R090B-6SS | 90±20% | 500 | 600 | 1 | 1.5 | 10 | 15 | 10 | 300 | |||||||||||||||||||||||
2R150B-6SS | 150±20% | 500 | 600 | 1 | 1.5 | 10 | 15 | 10 | 300 | |||||||||||||||||||||||
2R230B-6SS | 230±20% | 600 | 700 | 1 | 1.5 | 10 | 15 | 10 | 300 | |||||||||||||||||||||||
2R250B-6SS | 250±20% | 600 | 700 | 1 | 1.5 | 10 | 15 | 10 | 300 | |||||||||||||||||||||||
2R300B-6SS | 300±20% | 750 | 850 | 1 | 1.5 | 10 | 15 | 10 | 300 | |||||||||||||||||||||||
2R350B-6SS | 350±20% | 800 | 900 | 1 | 1.5 | 10 | 15 | 10 | 300 | |||||||||||||||||||||||
Glow Voltage at 10mA ~60V | ||||||||||||||||||||||||||||||||
Arc Voltage at 1A............................................................................... ~10V | ||||||||||||||||||||||||||||||||
Glow to Arc transition Current ~1.0A | ||||||||||||||||||||||||||||||||
Weight…………………………………………………………………...... ~0.8g | ||||||||||||||||||||||||||||||||
Operation and storage temperature……………………………………. -40~+90°C | ||||||||||||||||||||||||||||||||
Climatic category (IEC 60068-1)……………………………………….. 40/90/21 | ||||||||||||||||||||||||||||||||
Surface treatment……………………………………………………...... Matte-tin plated |
1) At delivery AQL 0.65 level II, DIN ISO 2859
2) In ionized mode
3) Insulation Resistance Measuring Voltage:
75V at DC 25V
90V~150V at DC 50V
Other at DC 100V
Terms in accordance with ITU-T Rec. K.12, IEC 61643-311, GB/T 9043.
Dimensions
Symbol | Millimeters | Inches | |||||||||||||||||
A | 6.2±0.2 | 0.244±0.008 | |||||||||||||||||
B | 6.2±0.2 | 0.244±0.008 | |||||||||||||||||
C | 6±0.3 | 0.236±0.012 | |||||||||||||||||
D | 0.6±0.1 | 0.024±0.004 | |||||||||||||||||
E | 6.1±0.1 | 0.240±0.004 | |||||||||||||||||
F | 7.5±0.2 | 0.295±0.008 | |||||||||||||||||
X | 1.3 | 0.051 | |||||||||||||||||
X1 | 5.8 | 0.228 | |||||||||||||||||
Y | 7.0 | 0.276 |
Taping and Reel Specifications
Symbol | Millimeters | Inches | |||||||||||||||||
W | 16±0.3 | 0.630±0.012 | |||||||||||||||||
A0 | 6.5±0.1 | 0.256±0.004 | |||||||||||||||||
B0 | 6.3±0.1 | 0.248±0.004 | |||||||||||||||||
K0 | 6.4±0.1 | 0.252±0.004 | |||||||||||||||||
P | 12±0.1 | 0.472±0.004 | |||||||||||||||||
F | 7.5±0.1 | 0.295±0.004 | |||||||||||||||||
E | 1.75±0.1 | 0.069±0.004 | |||||||||||||||||
D | 1.5+0.1/-0.0 | 0.059+0.004/-0.0 | |||||||||||||||||
P0 | 4±0.1 | 0.157±0.004 | |||||||||||||||||
P2 | 2±0.1 | 0.079±0.004 | |||||||||||||||||
T | 0.5±0.1 | 0.020±0.004 | |||||||||||||||||
D0 | 13.3±0.15 | 0.524±0.006 | |||||||||||||||||
D1 | 330±2 | 12.992±0.079 | |||||||||||||||||
D2 | 100+1/-2 | 3.937+0.039/-0.079 | |||||||||||||||||
W1 | 16.5±0.4 | 0.65±0.016 |
Soldering Parameters - Reflow Soldering (Surface Mount Devices)
Reflow Condition | Pb - Free assembly | ||||||||||||||||||||||
Pre Heat | -Temperature Min (Ts(min)) | 150°C | |||||||||||||||||||||
-Temperature Max (Ts(max)) | 200°C | ||||||||||||||||||||||
- Time (min to max) (ts) | 60 -180 Seconds | ||||||||||||||||||||||
Average ramp up rate ( Liquids Temp TL) to peak | 3°C/second max | ||||||||||||||||||||||
TS(max) to TL - Ramp-up Rate | 5°C/second max | ||||||||||||||||||||||
Reflow | - Temperature (TL) (Liquids) | 217°C | |||||||||||||||||||||
- Time (min to max) (ts) | 60 -150 Seconds | ||||||||||||||||||||||
Peak Temperature (TP) | 260 +0/-5°C | ||||||||||||||||||||||
Time within 5°C of actual peak Temperature (tp) | 10 - 30 Seconds | ||||||||||||||||||||||
Ramp-down Rate | 6°C/second max | ||||||||||||||||||||||
Time 25°C to peak Temperature (TP) | 8 minutes Max | ||||||||||||||||||||||
Do not exceed | 260°C |