Active Member
|
[China]
Address: 4th Flr,10th Bldg,Nangang Second Industrial Park,Songbai Road,Xili Street,Nanshan Dist,Shenzhen.
Contact name:Doris Yao
HiOSO Technology Co., Ltd. |
|
|
An Intelligent 10 / 100M Adaptive Fast Ethernet Fiber Media Converter
Overview
HiOSO FC830A is an intelligent 10/100M adaptive fast Ethernet fiber media converter (also called optical-to-electrical medium converter). With its unique “link failure alert” function at both optical and electrical ends, this fast Ethernet fiber converter can completely replace the fiber converter of Network Management System (NMS) type and greatly reduce system cost.
FC830A can conduct mutual conversion between 10Base-T/100Base-TX
twisted pair electrical signals and 100Base-FX optical signals.
FC830A extends the transmission distance of a network from 100m
over copper wires to 120 Km, and uses two network transmission
technologies (that is, the data link layer 2 storing &
forwarding mode and the physical layer 1 straight-through mode) to
implement data transmission between the optical and electrical
network connection mediums. FC830A fiber converter supports
transmission in dual-fiber multi-mode, dual-fiber single-mode and
single-fiber single-mode fibers.
Technical Specification
| Parameters | Specifications |
| Access mode | 10/100Mbps |
| Standard | IEEE802.3 10Base-T Ethernet, IEEE802.3u, 100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control, IEEE802.1q VLAN, IEEE802.1p QoS, IEEE802.1d Spanning Tree |
| Wavelength | 850nm/1310nm/1550nm |
| Transmission distance | Dual-fiber multi-mode: 2Km; dual-fiber single-mode:
25/40/60/80/100/120Km;single-fiber single-mode: 25/40/60/80/100Km Category-5 twisted pairs: 100m |
| Port | One RJ45 port: Connected to STP/UTP category-5 twisted pairs One fiber port: Multi-mode – SC or ST (fiber size: 50,62.5/125μm) Single mode – SC/FC fiber port (fiber size: 9/125μm) Single-fiber single-mode – SC/FC fiber port (fiber size: 9/125 μ m) |
| Conversion mode | Medium conversion, storing and forwarding/straight-through |
| MAC address table | I K |
| Buffer space | 1Mbit |
| Flow control | Full duplex state: flow control; half-duplex state: back pressure mode |
| Delay | Storing & forwarding: 9.6 μ s; straight-through: 0.9 μ s; |
| Bit error rate | <1/1000000000 |
| MTBF | 100,000 hours |
| LED | POWER (power), FX LINK/ACT (fiber link/action) FDX (FX full-duplex mode), TP LINK/ACT (twisted pair link/action) TP 100 (twisted pair: transmission rate of 100M); FX 100 (fiber: transmission rate of 100M) (external power) |
| Power | DC5V 1A (external), AC220 0.5A/DC-48 (built-in) |
| Power consumption | <2W |
| Operating temperature | -10~55°C |
| Operating humidity | 5%~90% |
| Storage temperature | -40~70°C |
| Storage humidity | 5%~90% (non-condensing) |
| Dimensions | 26mm(H)*71mm(W)*95mm(D) (height * width * depth) (external power) 26mm(H)*85mm(W)*135mm(D) (height * width * depth) (built-in power) 110mm(H)*22mm(W)*81mm(D) /(height * width * depth) (module card) |
