Car Audio Amplifier Circuit Prototype PCB Board In 1.6mm Thickness

Car Audio Amplifier Circuit PCB Green Mask Material Prototype PCB Board In 1.6mm Thickness

Quick detail:

Specification:

FR-4 material is a fire code rating, represents a material specification is meant a resin material through the combustion state must be self-extinguishing, it is not a material name, but a material grade. So now FR-4 grade material is typically used in circuit boards, there are many species, but most are based on the so-called four-function (Tera-Function) plus epoxy filler (Filler) and glass fiber made composite materials.

Specification:

Layer: 2

Color: Green

Line width: 5mil

Line space: 5mil

Hole: 0.2MM

Car Audio Amplifier Circuit PCB Green Mask Material Prototype PCB Board: a high heat resistance. Usually high Tg of 130 degrees or more plates, excellent high Tg is generally greater than 170 degrees, moderate Tg greater than about 150 degrees, PCB boards normally Tg≥170 ℃, called high Tg PCB. With the rapid development of the electronics industry, especially in the computer as the representative of electronic products toward high performance, high multi-layered development requires a higher heat resistance as an important guarantee of PCB substrate material. The emergence and development of SMT, CMT, represented by high-density mounting technology, the PCB in a small aperture, fine lines, thin side, increasingly inseparable from the high heat resistant substrate support.

Tg of the substrate is increased, PCB thermal resistance, moisture resistance, chemical resistance, stability and other characteristics will improve and improve. TG higher the value, the better the sheet temperature resistance, especially in the lead-free process, the high Tg applications more.

Parameter:

Features

• High Thermal Performance
 Tg: 180°C (DSC)
 Td: 340°C (TGA @ 5% wt loss)
 Low CTE for reliability
• T260: 60 minutes
• T288: 30 minutes
• RoHS Compliant
• UV Blocking and AOI Fluorescence
 High throughput and accuracy during PCB
fabrication and assembly
• Superior Processing
 Closest to conventional FR-4 processing
• Core Material Standard Availability
 Thickness: 0.002″ (0.05 mm) to 0.125″
(3.2 mm)
 Available in full size sheet or panel form
• Prepreg Standard Availability
 Roll or panel form
 Tooling of prepreg panels available
• Copper Foil Type Availability
 Standard HTE Grade 3
 RTF (Reverse Treat Foil)
• Copper Weights
 ½, 1 and 2 oz (18, 35 and 70 μm) available
 Heavier copper available upon request
 Thinner copper foil available upon request
• Glass Fabric Availability
 Standard E-glass
 Square weave glass fabric available
 Spread glass fabric available
• Industry Approvals
 IPC-4101C /21 /24 /26 /97 /98 /99 /101 /126
 UL - File Number E41625 as PCL-FR-370HR
 Qualified to UL's MCIL Program

Rogers material in stock: