Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Forsentek Co., Limited |
|
|
Flange Mounting Load Cell 100N 200N 500N 1kN 2kN 5kN Compression Sensor
Flange Mounting Load Cell FFR is made of stainless steel utilizing strain gauge technology to deliver mV/V output from the full wheatstone bridge. Flange Type Thrust Force Sensor FFR offers 0-100N / 0-200N / 0-500N / 0-1000N / 0-2000N / 0-5000N / 0-10kN seven rated measuring ranges to choose from, Column type thrust force transducer FFR is designed for compression force measurement with flange-to-flange configuration. Flange Mounted Compression Sensor FFR is suitable for applications such as automated control process, cylinder thrust measurement, assembly force monitoring, bearing press fit measurement, welding clamping force control, hand press force verification, fixture clamp force test and so on. In addition to the standard specifications, Forsentek is also capable of and willing to provide load cell custom design service to meet requirements of different applications.
| Ordering code | Measurement Range | Force direction |
| FFR-10kg | 0-100N / 0-10kgf | Compression |
| FFR-20kg | 0-200N / 0-20kgf | |
| FFR-50kg | 0-500N / 0-50kgf | |
| FFR-100kg | 0-1kN / 0-100kgf | |
| FFR-200kg | 0-2kN / 0-200kgf | |
| FFR-500kg | 0-5kN / 0-500kgf | |
| FFR-1000kg | 0-10kN / 0-1000kgf |
Specifications
| Capacity | 100N / 200N / 500N / 1kN / 2kN / 5kN / 10kN 10kg / 20kg / 50kg / 100kg / 200kg / 500kg / 1000kg |
| Rated output | 1.5 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.3% R.O. |
| Hysteresis | ±0.3% R.O. |
| Nonrepeatability | ±0.1% R.O. |
| Creep(5min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 750±100 ohms |
| Output resistance | 700±10 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP65 |
| Material of element | Stainless steel |
| Cable | Ø3*3000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
Flange Mounting Load Cell 100N 200N 500N 1kN 2kN 5kN Compression Sensor
A Force Sensor is a transducer that converts mechanical load into mV signal proportional to the applied force.The acting force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply, the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the transducer.
Output signal of load cell and amplifier:
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of Flat Surface Load Cell FFR is normally around
1.5mV/V.
Power supply of Flange Mounting Load cell FFR is normally within
3-15V.
Load / Capacity is within 0-1.
So the output range of Compression Type Thrust Force Sensor FFR is
normally within 0…+22.5mV.
Example one: Flanged Thrust Force Transducer FFR-200kg with 1.5mV/V
sensitivity powered by 5V DC,the output range is 0mV...+7.5mV.
Example two: Flange Type Press Force Sensor FFR-1000kg with
1.5mV/V rated output powered by 10V DC,the output range is
0mV...+15mV.
The mV/V output from the wheatstone bridge sometimes can hardly be
processed directly, a signal conditioner can be used with the load
cell to deliver -5~5V, 0-10V or 4-20mA output.
Example one: Flange Type Compression Force Transducer
FFR-5kN working with amplifier FSC(0-10V)-24V,the Load-Voltage
relationship will be 0-5000N compression force VS 0-10V output,
which is linear regardless of the measurement error, 1V output
corresponds to 500N compression load, 2V output corresponds to
1000N compression load, and so on.
Example two: Flange Mounting Compression Force Sensor
FFR-1kN working with amplifier FSC(4-20mA)-24V,the
Force-Current relationship will be 0-1000N compression force VS
4-20mA output, which is linear regardless of the measurement error,
4mA output corresponds to “0” load, 5.6mA output corresponds to
100N compression load, 12mA output corresponds to 500N compression
load, and so on.
Flange Mounting Load Cell 100N 200N 500N 1kN 2kN 5kN Compression Sensor
