Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Forsentek Co., Limited |
|
|
M6 Threaded Rod End Compression Load Cell 10kg 20kg 30kg 50kg
Rod End Compression Type Load Cell FCLQ is made of stainless steel based on strain gauge
technology offering 0-10kg / 0-20kg / 0-30kg / 0-50kg
four rated capacities to choose from intended compression
force measurement. The M6 threaded rod located on the top of the
sensor can be used to mount attachments such as load buttons and
eye bolts for different applications. Compared to universal side
cable outlet, force transducer FCLQ adopts bottom cable outlet
which helps save the mounting space, Compression Force
Sensor FCL is suitable for in-line force measurement.
Transducer FCLQ can be modified or customized as per request of
clients or different applications.
Dimensions(Unit in milimeter)
Specifications
| Capacity | 10kg / 100N / 22lb |
| Rated output | 1.5mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.5% R.O. |
| Hysteresis | ±0.5% R.O. |
| Nonrepeatability | ±0.2% R.O. |
| Creep(5min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | 0...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.03% R.O./oC |
| Temperature shift span | ±0.03% R.O./oC |
| Input resistance | 380±30 ohms |
| Output resistance | 350±5 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP65 |
| Material of element | Stainless steel |
| Cable | Ø3*3000mm 4-core shielded cable |
Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A Force Sensor is a transducer that converts mechanical load into mV signal proportional to the applied force.The acting force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply, the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of force transducer FCLQ is around 1.5mV/V.
Power supply is normally within 3-15V.
Load / Capacity is within 0-1.
So the output range of FCLQ is normally within 0-22.5mV.
Example one: Compressive Load Cell FCLQ-20kg with 1.5mV/V rated
output powered by 10V DC,the output range is 0...+15mV.
Example two: Compression Type Loadcell FCLQ-30kg with 1.5mV/V rated
output powered by 5V DC,the output range is 0...+7.5mV.
A signal conditioner is normally used with the load cell to deliver -5~5V, 0-10V or 4-20mA output for easy data processing:
Example: FCLQ-50kg working with amplifier FSC(0-5V)-24V,the load-voltage relationship will be 0-50kg compression load VS 0-5V output,when you get 1V output,it means the current load is 10kg,when you get 2V output,it means the current load is 20kg,and so on.
M6 Threaded Rod End Compression Force Transducer 100N 200N 300N 500N
