Home Companies LAKER AUTOPARTS CO.,LIMITED

36V Automatic Battery Charger Single Phase Microcomputer Controlled 240X350X260 mm

Contact Us

[China]

Trade Verify

Address: No. 37 Xiangyuan Road, Gongshu District, Hangzhou City, Zhejiang Province, China

Contact name:Molly

LAKER AUTOPARTS CO.,LIMITED

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

36V Automatic Battery Charger Single Phase Microcomputer Controlled 240X350X260 mm

Country/Region	china
City & Province	hangzhou zhejiang
Categories	Polishers

Product Details

36V Automatic Battery Charger Single Phase Microcomputer Controlled 240X350X260 mm

Type	Forklift Battery Charger
Model	CZB5C 36V/30A
Application	Electric Forklift
Battery parameter	36V 175-240Ah

Introduction:

CZB5C Series Intelligent Charger is the organic combination of leakage transformer, technology of Silicon-controlled rectifier and Microcomputer Control. This device could optimize Wsa+Pulse charging characteristic curve. As charge voltage of battery increases, charge current decreases automatically.

Pulse charge would be performed before gas emissions or in late stage of recharge. On the premise of guarantee adequate battery power, this device would lower greatly internal temperature

and reduce gas emissions of battery, prolong the life of battery effectively and raise the charging

efficiency eventually.

The whole product has simple structure, convenient operation, complete functions and high efficiency.

Application:

This device would be applicable to recharge of lead-acid batteries which could be used in

various electric vehicle such as power pallet trucks, fork-lift truck, lift truck, electronic tour bus.

Product Catalogs:

Single-phase AC(1/N/PE) or two-phase AC(2/PE) input power voltage.

Specification	Input current A		Input power kVA	Output current DC A	Battery parameters		outline dimension mm	Net weight kg
	@220V	@380V			V	Ah
	@220V	@380V			V	8.5h-11h
E24V/20A	3.4	——	0.75	20	24	115-160	240×350×260	21.0
E24V/25A	4.3	——	0.9	25	24	145-200	240×350×260	21.0
E24V/30A	5.1	——	1.1	30	24	175-240	240×350×260	21.0
E24V/35A	6.0	——	1.3	35	24	205-280	240×350×260	21.0
E24V/40A	6.8	——	1.5	40	24	230-320	240×350×260	23.5
E24V/45A	7.7	——	1.7	45	24	260-360	240×350×260	23.5
E24V/50A	8.5	——	1.9	50	24	290-400	240×350×260	25.5
E24V/55A	9.4	——	2.1	55	24	320-440	240×350×260	25.5
E24V/65A	11.1	——	2.4	68	24	375-520	280×430×310	32.5
E36V/30A	7.7	——	1.7	30	36	175-240	240×350×260	23.5
E36V/35A	8.9	——	2.0	35	36	200-280	240×350×260	24.5
E36V/40A	10.2	——	2.3	40	36	230-320	240×350×260	24.5
E48V/25A	8.5	——	1.9	25	48	145-200	240×350×260	24.5
E48V/30A	10.2	——	2.3	30	48	175-240	240×350×260	28
E48V/35A	11.9	——	2.6	35	48	205-280	240×350×260	28
E48V/45A	15.3	8.9	3.4	45	48	260-360	466×361×785	42
E48V/55A	18.8	10.9	4.1	55	48	320-440	466×361×785	46
E48V/65A	22.2	12.8	4.9	65	48	375-520	466×361×785	50
E48V/80A	27.3	15.8	6.0	80	48	465-640	466×361×785	56
E72V/25A	12.8	——	2.8	25	72	145-200	280×430×310	35.5
E72V/30A	15.3	——	3.4	30	72	175-240	280×430×310	35.5

Product Features:

The Voltage and current double closed-loop framework is applied in the PID control technology. This device can achieve dynamic tracking and automatic adjustment of charge parameters.
Nixie tube would display charger parameters such as battery voltage, charge current, capacity and recharged time. It could als show the code of charging curve and fault. High-intensity LED lamp would indicate running state of this charging unit.
Functions of automatic detection, delaying and soft-start, Function of temperature compensation. The voltage of tipping point of gas emission would change with the temperature.
Tis device could also record data as the end of recharge for 30 times.
Protection and alarm functions of open crcuit, reverse connection, over load and short circuit breakdown.
Protection and alarm functions of overheat fault of transformer and module.
Equalization charge could ensure caacity consistency of battery packs, function of automatic initial charge, function of desulfuration charge.