Active Member
|
[China]
Address: Shaxi Town, Taicang City, Suzhou City, Jiangsu Province, China
Contact name:Jack Liao
Zhu Tang (Suzhou) Technology Co., Ltd. |
|
|
CNC Copper And Aluminium Wire Automatic Small Size Transformer Coil Winding Machine
Description
CNC Copper And Aluminium Wire Automatic Small Size Transformer Coil Winding Machine ZPX150-3 is a special equipment for winding coil. The machine is provided with three wire guides for winding three same coil simultaneously, which significantly improve production effectiveness. The machine can wind not only three coils with maximum length 150mm, but also one coil with maximum length about 500mm.
Main Components
1. Main steel frame, it is welded with steel
2. Main winding unit, with 4kw motor and winding shaft
3. Wire guide, three pieces
4. PLC based control system,
5. Pneumatic system
6. Servo motor
7. Foot pedal
Technical Parameters
Typical standard specifications of ZPX150-3 are shown below, however these can be easily modified as requested.
| Center Height: | 900 mm |
| Square Shaft Size: | 40x40x600 mm |
| Round Wire Diameter: | 0.3～4.0 mm |
| Max. Flat Wire Size: | 3x10 mm |
| Max. Finished Coil OD.: | 400 mm |
| Max. Each Coil Length: | 150 mm |
| Winding Motor Power: | 4kw |
| Winding Speed: | 0～200 rpm |
| Winding Speed Regulation: | Variable frequency and stepless speed regulation |
| Control system: | PLC |
| Spread Pitch: | Min. step: 0.01 mm |
| Counting Mode: | 5-digit counting, |
| Max. Turns Number Preset: | 9999.9 |
