Automatic 250mm Height Coil Winding Machine With Servo Motor Driven Wire Guide

Automatic 250mm Height Coil Winding Machine With Servo Motor Driven Wire Guide

Description

Automatic 250mm Height Coil Winding Machine With Servo Motor Driven Wire Guide ZPX250 can be used to wind copper or aluminium flat or round wire, the max height of finished coil can be up to 250mm. This machine is provided with a wire guide, which is driven by one servo motor with 0.75kw, the wire guide is mainly used to lay the wire evenly; a touch screen, all of the parameters can be input through the screen; a foot pedal, which can be used to switch the rotating direction. The coils the winding machine handle can be used in transformer, reactor and other similar products. 

Main Components

1.  main frame,  steel welded frame makes it very strong
2.  main winding unit,  2.2kw motor driven the winding shaft to wind different specifications of coil
3.  automatic wire arrangement unit, including servo motor, linear guide and so on.
4.  electronic cabinet,  in this cabinet, there is driver, PLC and other electrical component
5.  pneumatic system,  providing power for all pneumatic component
6.  foot pedal

Technical Parameters

Typical standard specifications of ZPX250 are shown below, however these can be easily modified as requested.

1.  Center height: 900mm
2.  Tailstock: live center
3.  Motor power: 2.2kw
4.  Control system: PLC
5.  Flat wire size, max. : 2x8mm
6.  Round wire: 0.3-4.0 mm
7.  Spread pitch: 0.01mm
8.  Counting range:0 - 9999.9
9.  Max. finished coil OD. : 400mm
10.  Max. finished coil height:250mm
11. Max. winding program number: more than 50 pcs.