High Precise Transformer Coil Winding Machine With Lay Wire Automatically

400mm Height Coil Transformer Coil Winding Machine With PLC Based Control System

Description

400mm Height Coil Transformer Coil Winding Machine With PLC Based Control System ZPX400 can

• lay wire automatically
• wind copper or aluminium wire
• wind flat or round wire
• wing different shape of wire coil, such as circle, oval and rectangular etc.
• count the turns, the range is from 0 to 9999.99
• revert counting
• wind with different speed, just through adjusting the potentiometer on the board
• set spread pitch between turns
• start slowly, at the beginning of running machine, the rotating speed will rise gradually till to the normal speed, the duration can be preset, from 0 seconds to 5 seconds

Main Feature

• Occupying small space, this machine is mainly used to wind small coil, the volume is small
• Setting parameters is very easy, the parameters can be input through the touch screen
• Easy to operate, just inputting the relevant parameters, the machine can winding automatically as per the parameters
• The winding speed can be adjusted through a potentiometer on the screen board
• Spread pitch between turns can be preset, the minimum is 0.01mm
• Strong pulling force, 1.5kw motor is enough to winding the wire coil
• Automatic laying the wire, a 0.75kw servo motor driven wire guide to arrange the wire precisely
• The wire decoiler can provide a proper tension to make the wound coil tight
• The tension can be adjusted through a valve
• The tension can be shown on a pressure gauge

Main Parameters

Typical standard specifications of ZPX400 are shown below, however these can be easily modified as requested.