Guangzhou Xingjin Fire Equipment Co.,Ltd. |
Verified Suppliers
|
|
Piped network type of fm200 automatic fire suppression system
parameter:
No. | specification | Technical Parameter | |
1 | Filling pressure | 4.2Mpa | 5.6Mpa |
2 | Scale of Protective region for one zone | area:max single-zone is 800m² volume:max single-zone is 3600m³ | |
3 | Spraying time | ≤10s | |
4 | Filling density | ≤950kg/m3 | ≤1080kg/m3 |
5 | power | DC24V/1.6A | |
6 | Nitrogen Pressure of Driving Device | 6.0±1.0Mpa(20℃) | |
7 | Condition of reserving room for container | temperature: -10~50℃, relative humidity: ≤97% | |
8 | max working pressure | 5.3Mpa | 8.0Mpa |
9 | min working pressure | 4.2Mpa | 4.6Mpa |
Description:
A piped network type of FM200 automatic fire suppression system is
a type of gaseous fire suppression system that is designed to
suppress fires by releasing FM200 gas through a network of pipes
and nozzles in a protected area. This system is commonly used in
large areas, such as warehouses, data centers, and industrial
facilities, where a fixed location of FM200 storage tanks would not
be practical.
The system comprises of FM200 storage tanks, release valves,
detection and control panels, piping, and discharge nozzles. The
detection and control panels include heat detectors, smoke
detectors, manual call points, and pre-action systems.
When a fire is detected, the system is triggered to release FM200
gas into the affected area, extinguishing the fire by reducing the
oxygen concentration to a level where combustion can no longer
occur. The FM200 gas is distributed through the piping system and
nozzles to the protected area, which is designed to provide fast
and effective fire suppression with minimal disruption to the
protected area, occupants, and assets.
The piping for an FM200 system is typically made of high-strength
steel to withstand high pressures and is installed in a grid
pattern throughout the protected area. Nozzles are installed at
regular intervals to ensure that the FM200 gas is distributed
evenly and effectively. The system is designed to cover all areas
of the protected space, including hard-to-reach areas or hidden
spaces that could pose a fire risk.
The FM200 system is highly effective in suppressing fires and has a
relatively low cost of maintenance. Additionally, the system
provides an environmentally friendly alternative to traditional
fire suppression systems since it contains no CFCs and has a low
global warming potential.
Overall, the FM200 piped network type of automatic fire suppression
system is a reliable, efficient, and safe solution that provides
excellent fire protection for large industrial and commercial
facilities.
Applications:
Electronic computer room, a data processing center,
telecommunications facilities, process control, expensive medical
equipment, industrial equipment, library, museum and art gallery,
clean room, anechoic chamber, emergency power facilities, flammable
liquid storage area, etc.
The place where the fire is easy to happen, like
paint-spraying production line, aging-electrical equipment, rolling
machine, printing machine, oil switch, oil immersed transformer,
melt impregnating tank, tank, large generators, drying equipment,
cement pro duction process of pulverized coal, and the ship's
engine room, cargo hold, etc.
Compositions:
piped network type of fm200 automatic fire
suppression system is mainly composed by three parts. Extinguishing
devices and pipe fittings and electrical accessories.
Extinguishing devices are such things, like cylinder
to fill and store fm200, frame and driving device(nitrogen
cylinder) to trigger the storage cylinder to discharge agent and so
on.
Pipe fittings are those conduits to connect
extinguishing device and guide agent into protective zone, like
high pressure galvanized steel pipe and flange and elbow and so on.
Electrical accessories are those things which are
used to detect and monitor whole protective area and control whole
system, also warn people to evacuate and prevent from fire
expansion.
These integrated three parts will be efficient to
detect and supervise and alarm and extinguish fire automatically.
Here attached below is complete composition of whole system,
Competitive Advantage:
In terms of description of agent, one of its competent advantages
is that it can be used for all kinds of class fires except metal
fire. And it is clean agent. There is no residue and pollution
after extinguishing.
Another one is that fm200 extinguishing system is special for
critical assets or device. It will have no damage for your
property. Relatively, it is cheap and effective to be chosen as
fire suppression system.
It is very efficient for you to protect your possession. Since it
is a system, it include extinguishing device to put out fire at
short time, specially, shorter than 10 second. It means all agent
will be discharged in so short time. Then it will be flooding
overall. In addition, it has time-delay mechanism. It is around 2
minute. It means when fire happens, there is enough time left to
evacuate people from hazardous place.
It can let multiple zones are protectively in the control of one
system. Then it will save much money for big and multiple zones.
Working principle:
Here is the illustration of working principle to whole system,
Simulated diagram:
Below attached is one mimic diagram of piped network type of fm200
automatic fire suppression system,
Company Introduction
Guangzhou Xingjin Fire Equipment Co., Ltd., surrounded by
convenient transportation and beautiful environment, is located in
Guangzhou, which plays an important role in communication between
China and the world. We are a manufacturer, and we devote ourselves
to the study and development of HFC-227ea (FM200) productions with
our professional and mature team including the program design team,
the skillful installation team, the quality detecting team and the
after-sell service team. Nowadays, our popular fm200 products are
widely used, such as the pipe network FM200 fire suppression
system, the cabinet type FM200 fire suppression system, the
automatic FM200 fire extinguisher
(ceiling mounted style), the fire detecting tube suppression system
and automatic fire suppression tube. As a result of high-quality
products and services as well as the good reputation, our company
is well-received by the customers in China.
Why Choose Us
• 5 years quality guarantee
• Xingjin is running in a high efficiency management system
• Advanced equipments & professional engineers to promise all
products are quite satisfactory.
• We provide 8×6 hrs technical support and service.
After-Sale Service
• We have an efficient sales and after sales team to promise slove
all client's question in time.
• We provide 8×6 hrs technical support and service.
FAQ
Q1: Are you a manufacturer or a trading company?
A1: We are a manufacturer.
Q2: Is OEM products available?
A2: Yes, we welcome your own design and drawing.
Q3: Where is your factory? Can I visit it?
A3: Our factory locates in Shilou, Panyu, Guangzhou, Guangdong,
China.
Of course yes. We always welcome and wait for your visit.
Q4: How can I get to your factory?
A4: Because of the convenient transportation here, you can take a
taxi or come here by subway. If you come here by subway, you need
to take the line four and get off at Shiqi station. Then walk out
the station for taking No. 126 bus and get off at Yuexi station.