Home Companies Xi'an Kacise Optronics Co.,Ltd.

KWL800 76 - 81GHz FM Continuous Wave Radar Water Level Sensor With RS485 Modbus Communication

Xi'an Kacise Optronics Co.,Ltd.

Contact Us

[China] country

Trade Verify

Address: i City, No11, TangYan South road, Yanta District, Xi'an,Shaanxi,China.

Contact name:Evelyn Wang

Inquir Now

Xi'an Kacise Optronics Co.,Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

KWL800 76 - 81GHz FM Continuous Wave Radar Water Level Sensor With RS485 Modbus Communication

Country/Region china
City & Province Shaanxi
InquireNow

Product Details

KWL800 65m Range 76-81GHz FM Continuous Wave Radar Water Level Sensor with RS485 Modbus Communication
 
Introduction

KWL800 radar level sensor series products refer to frequency modulated continuous wave (FMCW) radar products working at 76-81GHz. The maximum range of the product can reach 65m, and the blind zone is within 10 cm. Because of its higher operating frequency, larger bandwidth, and higher measurement accuracy.

 
Feature

⚫ Based on CMOS millimeter-wave radio frequency chip, realize more compact radio frequency
architecture, higher signal-to-noise ratio, and smaller blind area.
⚫ Higher measurement resolution and measurement accuracy.
⚫ Narrow antenna beam angle is 6°, the interference in the installation environment will have less
impact on the instrument, and the installation is more convenient.
⚫ Integrated lens design, compact size.

 

Specification

 

Transmit Frequency76GHz~81GHz
Measuring Range0.1 m ~ 65m
Measurement Accuracy±1mm
Beam Angle
Power Supply Range9~36 VDC
Communication MethodRS485
Operating Temperature-40~85℃
Shell MaterialPP
Antenna TypeLens antenna
Recommended Cable7*0.3mm²
ProtectionIP68
Installation MethodBracket

 
Installation Method

There are two points to pay attention to during installation:

(1) Ensure that the meter is perpendicular to the water surface.

(2) Avoid emitting beams from irradiating interference objects and generating false echoes.

 

See the following points for typical working conditions.

Ensure that the water level sensor is installed vertically to the water surface, and the tilt will weaken the received signal amplitude, which will affect the normal distance measurement.

 

 

Make sure that there are no interference objects within the beam range, such as the banks of rivers.

 

               
 
The instrument should be installed at least 20cm away from the side wall, and the underground pipe network should be installed as close to the center of the well as possible, otherwise the well wall will easily generate interference signals, which will affect the measurement and judgment.

 


                  
 ​

 


 

 

Hot Products

30mm /1.2" aluminium glycerine freon hydraulic pressure gauge Product Description Application PGV ...
60mm /2.5" aluminium glycerine freon nitrogen pressure gauge Product Description Application PGV ...
50mm / 2" 316ss oil filled ammonia refrigerant pressure gauge Product Description Application PGV ...
50mm / 2" brass silicone oil filled refrigerant freon pressure gauge Product Description Application ...
60mm /2.5" brass silicone oil filled lpg ammonia pressure gauge Product Description Application PGV ...
China supplier high accuracy low price digital peak pressure gauge for pressure peak value recording ...