Home Companies Xi'an Kacise Optronics Co.,Ltd.

KLD803 AC220V Power Supply Radar Water Level Sensor Support OEM Service

Xi'an Kacise Optronics Co.,Ltd.

Contact Us

[China] country

Trade Verify

Address: i City, No11, TangYan South road, Yanta District, Xi'an,Shaanxi,China.

Contact name:Evelyn Wang

Inquir Now

Xi'an Kacise Optronics Co.,Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

KLD803 AC220V Power Supply Radar Water Level Sensor Support OEM Service

Country/Region china
City & Province Shaanxi
Categories Switching Power Supply
InquireNow

Product Details

 

KLD803 80G FM Radar Level Sensor

Introduction

The extremely narrow microwave pulse emitted by the antenna on radar level instrument can travel at the speed of light and part of its energy, which is reflected off the surface of target medium, is received by the very same antenna. The time lapse between pulse emission and reception by the antenna is proportional to the distance between the surface of target medium and the reference point on antenna. However, due to the fact that the electromagnetic wave is transmitted at extremely high speed, which leads to the tiHH time lapse (nanosecond level) and makes it difficult to be identified, the series of radar level instrument have adopted a special demodulation technology, enabling itself to detect the time lapse between pulse emission and reception correctly, and eventually generate accurate measurement result.

Feature

• Low power consumption power supply enables the equipment to operate independently in the most remote areas;
• Non-contact measurement principle. Not damaged by silt accumulation or debris;
• Wireless transmission, avoid the trouble of pulling cables. Install and use, remotely unattended;
• High-level industrial requirements for the appearance of the iron shell. Application in hazardous areas and harsh environments;

 

KLD803

Medium: strong corrosive liquid, steam, foam

Measuring range: 0.1m~10/20/30/60/100m

Process connection: flange ≥ DN50

Process temperature: -40~130℃

Process pressure: -0.1~2.5MPa

Antenna size: 34mm lens antenna (according to flange size)

Antenna material: PTFE

Accuracy: ±1mm (range below 35m)

±5mm (range between 35m and 100m)

Protection class: IP67

Center frequency: 80GHz

Launch angle: 3°

Power supply: two-wire /DC24V

four-wire /DC12~24V

four-wire /AC220V

Casing: aluminum/stainless steel

Signal output: two-wire /4...20mA/HART protocol

four-wire 4...20mA/ RS485 Modbus

 

Product Dimension

Unit in mm:

 

 

Installation Method

Flange Installation

When using flange installation, the minimum distance between the instrument and the tank wall should be 200mm.

  • datum plane
  • vessel center or axis of symmetry

   

 

Hoisting Installation

 

Xi'an Kacise Optronics Tech Co., Ltd considers itself a solution provider and manufacturer. We offer maximum flexibility and a cost-optimised offer for our OEM customers.

 

What we could provide:
The range includes customized shell version/color, thread type(G-Thread/NPT Thread), Customized Software, prints, manual and catalog. If you are interested in installing at your side, Radar Module is available for sure.

 

 

 

 

Hot Products

30mm /1.2" aluminium glycerine freon hydraulic pressure gauge Product Description Application PGV ...
60mm /2.5" aluminium glycerine freon nitrogen pressure gauge Product Description Application PGV ...
50mm / 2" 316ss oil filled ammonia refrigerant pressure gauge Product Description Application PGV ...
50mm / 2" brass silicone oil filled refrigerant freon pressure gauge Product Description Application ...
60mm /2.5" brass silicone oil filled lpg ammonia pressure gauge Product Description Application PGV ...
China supplier high accuracy low price digital peak pressure gauge for pressure peak value recording ...