High Accuracy Insertion Flow Meter With Plug In Ultrasonic Insertion Sensor

Insertion Ultrasonic Flow Meter with Plug In Ultrasonic Insertion Sensor

Introduction

KUF2000 series ultrasonic flow meter usually is used in long-term measurement at field. It has three types of sensor to measure the pipe flow: clamp on type, insertion type and inline pipe type.

Insertion type: Only two installation holes are needed on the pipe, user can install the insertion type sensors. By using the hole making tool, the no stop flow installation can be realized. Sensors contact to the fluid directly, the measurement is stable and reliable.

Clamp on type: The sensors clamp on to the outside of pipes and do not come in contact with the internal liquid. And all the models can become energy meters when connecting to temperature sensors. KUF2000 Series Clamp On Ultrasonic Flowmeter is easy for installation, no need to cut off the pipe and water, no press loss. It support measuring online long-term. Wide range of liquid flow can be measured with the sensor clamped on the pipe.

Inline pipe type: DN15-32 pipes uses π shape inline pipe sensor, DN40 and above uses standard inline pipe sensor. The inline sensors has the advantages of low starting flow rate, high measurement accuracy and no pressure loss.

Features

• 1% accuracy.
• Wide range for various application fields. (DN50-DN6000)
• No mechanical drive in ultasonic flowmeter, parts are rarely damaged. Maintenance free and long operating life.
• Easy and quick installation. Save time with no pipe cutting or process shutdown.
• No obstruction measurement, no pressure loss.
• Connect Pt100 temperature transducer, can finish the heat/energy measurement.

Specification

Optional Flow Meter Main Unit

Optional Insertion Sensors

1. Standard Insertion Sensor

Suitable for the pipeline can be directly welded, like carbon steel and stainless. Pipeline thickness ≤ 2 0 Measuring range: DN50~DN6000 Temperature range:-30~+160℃

2. Extended Insertion Sensor

Suitable for the pipeline cannot be directly welded, like cement pipe, cast iron, PVC, steel or composite material. Pipeline thickness ≤ 7 0 Measuring range: DN50~DN6000 Temperature range:-30~+160℃

3. Parallel Insertion Sensor

Suitable for installation of insufficient space. Suitable for either weldable or non-weldable pipeline. Unlimited pipeline thickness, insertion depth= 1/3 inner diameter. Measuring range: DN80~DN6000 Temperature range:-30~+160℃

    
Optional Temp. sensor
 

 

Ordering Information