|
[China]
Trade Verify
Address: i City, No11, TangYan South road, Yanta District, Xi'an,Shaanxi,China.
Contact name:Evelyn Wang
Xi'an Kacise Optronics Co.,Ltd. |
|
Verified Suppliers
|
|
|
Small Size Compact Type Microbend type 0.1% Accuracy Sanitary Type Milk Mass Flow Meter
Product Description
Milk mass flow meter directly measures the "Mass" of the Medium with high accuracy based on the Coriolis Principle (Coriolis Force). The accuracy would not be affected by any factors like the temperature, pressure, density, viscosity,etc. And the compensation calculation is not required. The Coriolis Mass Flow Meter consists of two parts: the Sensor and the Transmitter. The Corioils Mass Flow Meter is designed and produced based on the national standard of explosion- proof standards.
Principles of Measurement
Coriolis mass flowmeter, referred to as Coriolis force flowmeter, is a device that directly measures mass flow by using the Coriolis force principle that is proportional to mass flow when fluid flows in the vibrating pipe. It is composed of flow detection components and converters. Coriolis mass flowmeter realizes the direct measurement of mass flow, with high precision, can measure multiple media and multiple process parameters, widely used in petrochemical, pharmaceutical, food and other industries.
Parameters
| Module | DN | Measurement Scope | Work Pressure (MPa) | Connection Type(mm) |
| KMF-1-1AB | 1.5 | 0～4(kg/h) | 0～4 | Weld Joints Φ6×1.5 |
| KMF-1-1A | 3 | 0～40(kg/h) | 0～4 | Weld Joints Φ6×1.5 |
| KMF-1-1B | 6 | 0～100(kg/h) | 0～4 | Weld Joints Φ10×2 |
| KMF-1-2A | 8 | 0～200(kg/h) | 0～4 | Weld Joints Φ10×1 |
| KMF-1-3A | 10 | 0～500(kg/h) | 0～4 | Flange DN10 |
| KMF-1-3B | 15 | 0～1000(kg/h) | 0～4 | Flange DN15 |
| KMF-1-4 | 20 | 0～3000(kg/h) | 0～4 | Flange DN20 |
| KMF-1-5A | 25 | 0～10(T/h) | 0～4 | Flange DN25 |
| KMF-1-5B | 40 | 0～20(T/h) | 0～4 | Flange DN40 |
| KMF-1-6A | 50 | 0～30(T/h) | 0～4 | Flange DN50 |
| KMF-1-6AB | 65 | 0～50(T/h) | 0～4 | Flange DN65 |
| KMF-1-6B | 80 | 0～100(T/h) | 0～2.5 | Flange DN80 |
| KMF-1-6C | 100 | 0～150(T/h) | 0～2.5 | Flange DN100 |
| KMF-1-6CD | 125 | 0～200(T/h) | 0～2.5 | Flange DN125 |
| KMF-1-6D | 150 | 0～400(T/h) | 0～2.5 | Flange DN150 |
| KMF-1-6E | 200 | 0～500(T/h) | 0～2.5 | Flange DN200 |
Feartures
² Reduced fill time with higher flow rate capacity
² Compact design with no moving parts, no special mounting and no flow conditioning required
² Fast delivery and global support
Application of mass flow meter
The KMF Coriolis flow meter family measures direct mass flow rates of liquids and gases in virtually all applications without special calibration. Safety, reliability, quality, and our innovative technologies enables us to provide a broad range of industry-specific products and services — and the expertise to put them to work for you.
Alternative Energy
Oil & Gas
Chemical
Food & Beverage
Industrial Energy
Life Sciences
Marine
Metals and Mining
Power
Pulp & Paper
Refining
Water & Wastewater
Others
Conditions required of installation
To guarantee the accuracy, conditions required when installation should be met, because the mass flow meter is a high precision instrument:
(1) The sensor (primary meter) and the transmitter (secondary meter) do not install in strong magnetic interferential area. Or, measuring signals would be disturbed, and debase the accuracy;
(2) There is must not any other vibrator on line installed the sensor (primary meter);
(3) If install outside of door, PLS pay attention circumstance temperature not to exceed the range of meter, and should consider to build a weatherproof shield to avoid blowing and drenching, for increasing lifetime of flow meter.
(4) The transmitter (secondary meter) of essential safety should mount in safety area or appropriate control room.
Instrument Selection
our service
1.Q: May I put my own logo on the product?
A: Sure. Logo can be printed on the housing, and company name can be engraved on the nameplate.
2.Q: How about the quality control?
A: All products will be tested for 3 times before packed.
3.Q: May I release trial order, 1 pc for example?
A: Certainly, trial order is acceptable. In general, we have common models in stock. Sample will be sent within 1 week, after payment is received.
4.Q: Could you design according to my requirements?
A: Of course, our team will design for you, to make our food grade pipe coriolis mass flow meter work perfectly at your end.
Delivery details
7 working days quick delivery. / Suggested Express company: DHL.
