Active Member
|
[China]
Contact name:Lisa
Anhui Sinomining Machinery Co., Ltd |
|
|
Mining Thickener ZG Peripheral Transmission Mud Scraper Tailings Treatment Machine
Introduction
Mainly used for sludge discharge in large radial flow primary sedimentation tanks and secondary sedimentation tanks. It is especially suitable for the removal of biological sludge with a lighter specific gravity. It has minimal disturbance to the water flow and has a good sludge discharge effect. There is also a mud volume regulating valve to adjust the mud volume to adapt to the mud volume under various conditions. The siphon mud discharge may also be used to control the mud volume.
Peripheral drive mud scraper is a double (single) peripheral drive of the center pier, which has a large transmission torque and energy saving. Adopt the central water inlet and sludge drainage, and the peripheral drainage to ensure uniform water flow, and use the self-priming sludge drainage of the liquid level difference.
Peripheral drive mud scraper is mainly composed of a driving mechanism, a main beam, a central rotating support, a deflector, a mud scraping system, a slag hopper and a washing mechanism, an articulated slag scraper, a slag skimmer, a skimmer, and a water outlet triangle. It is composed of board, scum baffle, control box and other components.
Through the deceleration drive and the transmission of the
suspended components, the sludge is scraped and collected by the
scraper to the central sludge collecting tank, and discharged out
of the tank by hydrostatic pressure or a pump.
Adopt the middle water inlet and sludge drainage, and the
peripheral drainage to ensure uniform water flow. Self-priming
sludge discharge using liquid level difference, scum scraping and
removing device and overload protection device.
Maintenance
In the process of using the peripheral drive mud scraper, we must
pay attention to daily maintenance, so that it can cooperate with
the sand dryer to a great extent, ensure the production volume and
efficiency, and extend the service life of the equipment.
(1) Lubricating oil should be regularly applied to transmission parts such as bearings, gears and chains.
(2) After the box delivery machine is out of service, check the wear of the spiral blades, and repair welding when the wear is serious.
(3) The conveying volume must not be overloaded, otherwise the material will not be discharged, causing the screw shaft to bend and the box to swell.
(4) When the conveying medium has a high degree of depression, pay attention to whether the expansion and contraction of the box body is free and there is no stuck place, and if there is any, solve it quickly.
(5) When the conveyor is running and the noise is harsh, the cover should be checked to eliminate the fault.
Parameter
| Models and specifications | ZG-16 | ZG-18 | ZG-20 | ZG-22 | ZG-24 | ZG-25 | ZG-28 | ZG-30 | ZG-35 | ZG-37 | ZG-40 | |
| Applicable tank diameter (m) | 16 | 18 | 20 | 22 | 24 | 25 | 28 | 30 | 35 | 37 | 40 | |
| Motor power (kw) | 1.1 | 1.5 | 2.2 | 3.0 | ||||||||
| Speed of scraper board at the margin | Primary setting tank | 2-3 | ||||||||||
| Secondary setting tank | 1.5-2.5 | |||||||||||
Embedded and civil engineering conditions (m)
| D1 | 2800 | 2800 | 3000 | 3000 | 3500 | 4000 | 4000 | 4200 | 4200 | 4500 | 4500 |
| D2 | 1350 | 1400 | ||||||||||
| H1 | 1800 | |||||||||||
| a | 1200 | 1200 | 1400 | 1400 | 1400 | 1400 | 1800 | 1800 | 2000 | 2000 | 2000 | |
| b | 800 | 800 | 900 | 900 | 900 | 900 | 1000 | 1000 | 800 | 1000 | 1200 | |
| c | 280 | 280 | 300 | 300 | 300 | 300 | 320 | 320 | 280 | 320 | 350 | |
| d | 200 | 250 | ||||||||||
| H2 | 700 | 700 | 800 | 800 | 800 | 800 | 900 | 900 | 900 | 1000 | 1000 | |
| e | 700 | 700 | 800 | 800 | 800 | 800 | 900 | 900 | 900 | 900 | 1000 | |
| Load (t) | P | 4.0 | 4.5 | 5 | 5.5 | 6 | 6.5 | 7 | 8 | 9.5 | 11 | 11.5 |
| W | 4.5 | 5 | 5.5 | 5 | 5.5 | 7 | 7.5 | 8.5 | 10 | 11.5 | 12 | |
Why choose our company machine?
Q1: Hi, are you a mining machinery manufacturer?
Answer: Yes, we are a professional manufacturer of mining machine.
Our company welcomes customers to visit our factory at any time.
Q2: How long is the warranty period of your equipment? Does your
company provide spare parts?
Answer: The warranty period of our machine is one year. For those
wearing parts, we guarantee to provide high-quality parts for a
long time.
Q3: How long does it take to deliver?
Answer: Production usually starts after receiving the advance
payment. Small machine is guaranteed to be delivered within one
month. Large-scale machine is guaranteed to be delivered within 2-3
months.
Q4: Do you provide machine operation guidance?
Answer: Yes. We have professional engineers for installation,
commissioning and operation guidance.
