Easy Operation Middle speed Printing slotting die-cutting & stacker Machine

• Adopt good quality steel tube, the surface be grinded, hard chrome plated, balance correction, running smoothly
• Hang plate device, cooperate with the ratchet shaft fixed volume board fix printing plate fast.
• Full hang-plate device, 10mm hang-plate strip is available.
• Foot switch electric control roller run clockwise or anticlockwise, convenient hanging version,unloading version.

Impression roller

• Seamless steel tube surface is grinded and plated hard chrome, do balance correction, running stable.
• Equipped manual gap adjustment device that fast and self-locking, dial indicates to show set direction and set amount.

• Use thick good quality steel pipe, professional manufacturing, do balance processing, the feeding roller adopt fine grinding to be molding.
• Equipped manual gap adjustment device that fast and self-locking, dial indicates to show set direction and set amount.

• Seamless steel tube surface being grinded and plated hard chrome, balance correction, smooth operation
• Mesh amount 200, 220,240,260 or according to customers' demand
• Pneumatic lift-down mechanism(while feeding, the anilox roll go down automatically; stop feeding, it go up automatically )
• Equipped manual gap adjustment device that fast and self-locking, dial indicates to show set direction and set amount.

• Adopt high quality stemless steel pipe, the surface be grinded, hard chrome plated, balance correction, running smoothly
• Special grinded crowning, work well

• Planetary gear structure
• Printing phase adopts 360 degrees electric adjustment (either run or stops)
• Printing roller manual horizontal adjustment, adjustment range ±10mm

• With pneumatic diaphragm pump to supply ink, automatically circulation, work stable and it is easy to operate and maintain.
• Ink filter, filter impurities, more better printing

• When units separating or cleaning, braking mechanism limit gear running, keep original gear’s position

• After washing the printing plate, press reset button the printing roller will back to the original printing position.

• Using high quality steel, with grinding process and plating hard chromium.
• Pressure roller surface be grinded and hard chromium plating ,do balance processing
• Equipped special design wheel is keep from crack.
• Equipped manual gap adjustment device that fast and self-locking, dial indicates to show set direction and set amount.

• Select seamless steel pipe, after fine grinding and balance treatment, smooth operation.

• Slotted knife width 7 mm, alloy material, heat treatment grinding, tooth profile slotting knife, sharp knife edge, high accuracy.
• The height of box is adjusted synchronously by four knives, and the slotted blade adopts four knife synchronous adjust manually
• Hand-tuned fast clearance fine-tuning self-locking device, equipped with dial to show adjustment direction and value

• Structure of planetary gear type

• Slotting phase adopt 360 degree electric synchronous adjustment.

• Slotting die and crease die move together manually