Full Automatic Servo Control Folder Gluer Stitcher Machine Two
Function In One Machine Cardboard Stitching Machine
GENERAL FEATURES
This machine is composed of eight parts: feeding part, glue unit,
folding part, correcting part, nail head part, turnover part, count
pushing part, automatic strapping part (optional) and electrical
system. Each working site is equipped with a separate motor and
operating platform, the operation more convenient and faster. The
machine adopts PLC control, control the number of cartons and the
number of hours. In the side of the machine is equipped with safety
alarm device, in case of error operation will automatically alarm.
General Parameters
| NO. | Item | MAX(mm) | MIN(mm) |
| Size | A | 2400 | 850 |
| B | 1200 | 350(glue)/400(stitch) |
| C | 850 | 200 |
| Suitable cardboard | AB,A,B,C,E 3/5 Layer |
| Precision | Seam:±2mm Folding scissor difference:±1.5mm |
| Stitching speed | Nail Speed:1100 Nails/min(Double Nails) |
| Box Height:500mm 80-110 Pcs/min |
| Box Height:900mm 60-80 Pcs/min |
| Gluing speed | Box Height:500mm 150-200 Pcs/min |
| Main motor | 15KW |
| Size (LxWxH) | 17500mm*4200mm*2200mm |
| Weight | 22T |
Feeding unit
- Leading edge feeding with vacuum suction, which guarantee feeding
more stable.
- Left and right baffle with a linear guide, high-precision
displacement
- Left and right baffle motorized adjustment;
- With an independent remote control adjustment platform and
positioning knife, positioning accuracy;
- Rear pallet up and down according to the size of the cardboard can
be adjusted in order to stabilize the delivery;
- The left and right sides of the paper feeding baffle can be
adjusted automatically according to the width of different
paperboard;
- The front of feeding unit with two paperboard feeding knife,
according to different thickness of cardboard up and down can be
adjustment;
Gluing Section
- The gluing width is 20-35mm, it’s bottom gluing.
- Gluing section can be adjusted to left or right according to the
cardboard size through with the lead screw roller controlled by
motor.
- The stainless steel wheel adopted for glung, can glue evenly, no
faults and saving the glue.
- The glue quantity can be set according to adjust the gap between
glue block and gluing wheels, can save the glue.
Folding Unit
- According to different shapes of cartons boxes, the front end of
the folding unit is provided with a glue device. The glue device is
composed of a lower rubberizing wheel, an upper pressing roller and
a plastic box;
- There are many different angles of the guide wheel, according to
the different paper and cardboard thickness, adjust the guide wheel
of different positions and angles, so that more smoothly folded
cardboard;
- The down belt is equipped with positioning on both sides of the
track to ensure that high-speed belt does not fall off;
- There are independent vacuum suction fans on the left and right
belts of the lower belt to ensure the stability of the carton
forming and avoid the traffic jams caused by different spacing. The
upper and lower belt gaps can be adjusted manually.
- The size of the seam control: left and right on the board with a
set of position guide
- The belt under the folding section is 6.5 meters long, which
ensures the carton forming has more advantages.
- Left and right under the guide plate combined welding into L-type,
cold and heat treatment after processing, strong and stable;
- Track the use of precision linear guide, high precision, durable,
as photo 4;
Correction section unit
- The belt can be adjusted according to the length of the carton to
ensure that the belt does not beat when the beat, beat no
resistance;
- Beat the Department of the use of servo motor, speed fast,
accurate;
- Take the robot position after the shoot, no scissors;
- Upper and lower belt gap can be automatically adjusted;
Stitching unit
- Nail head can be put 1100 nails per minute;
- Nail head with swing structure, to prevent the fast hole under the
nail will be widened;
- Nail cutter for the oblique mouth, the next nail is nail hole will
not be widened;
- The upper and lower belt gaps can be adjusted manually;
Counter Ejector
- The stacking boxes quantity ejected can be set according to
customized, and ejected in order, convenient to match the automatic
wrapping machine.
- The main motor of counting ejector the speed is frequency adjusted,
running smooth and stable.
- The flapping baffles are used for correcting the boxes, the
deviation is very small.
- Bottom conveying belts and upper pressure belts synchronously
pressing system adopted for the conveying section, to ensure the
finished boxes glued fastness, neatly and ejected in order, the
stacking height is 8-25 pcs.
Turnover section (Optional)
- Vacuum suction feeding more stable;
- Use guides to achieve automatic turnover;
- Anti-slip belts are used at the bottom to make sure belts run more
smoothly.
