Active Member
|
[China]
Address: NO 8001 JINGSHI EAST ROAD,JINAN CHINA
Contact name:Happle Hoo
GENERAL EAST CO.,LTD |
|
|
Logging Truck Trailer with Tri-Angle log Pillar for Super Heavy logs
A logging truck or timber lorry is a large truck used to
carry logs.Some have integrated flatbeds, some are discrete tractor
units, and some are configured to spread a load between the tractor
unit and a dollied trailer pulled behind it. Often more than one
trailer is attached.
There are two main types of modern logging trucks — those used on
rough ground and trails in the forest where they are felled and
those used for transport on normal highways and roads. Because the
roads in forests are rough and often temporary, the suspension and
tires of an off-road truck are especially significant. Solid, low
pressure and high pressure tires have been used. As many as nine
axles may be used to provide low ground pressure and good traction.
1. Quick View of our Flat bed Trailers
2. General Parameter of the Flat bed Truck Trailers
| Logging Truck Trailer with TriAngle log Pillar for Super Heavy logs | 9502LOGT | ||
| Logging Truck Trailer System | |||
| loggingTrailer overall outside dimension(mm) | Length | 2675 | |
| Width | 2550 | ||
| Height (unload) | 3,550 | ||
| Logging Truck Trailer GVW(kg) | 56500 | ||
| Logging Truck Trailer vehicle Tare Weight(kg) | 6500 | ||
| Logging Truck Trailer rated payload(kg) | 50000 | ||
| Linked Beam Length | 9-12m | ||
| Turn Tabble for the Pillars | 20T grade | ||
| Logging Truck Trailer Axle | 16T*2 | ||
| Tires | 13R22.5*8 | ||
| Trailer Material | Carbon Steel | ||
| Transport Material : | light long logs | ||
| Suspension System | 32T Grade Bogie suspension | ||
| Side Logging Pillars system | U shape Log pillars holde system equipment with Turn Table for the Turning , with Sawteeths at the Cross Beam Holder which Pin Joint with the side pillars to keep the Openning Angle to adjust the loading quantity. | ||
| Side Pillars | Left | Triangle Type 500mm | |
| Right | Triangle Type 501mm | ||
| Turn Table | 25 Grade for Pillar system rolling | ||
| Head Pulling Tractor truck Refitting | |||
| Overall outside dimension(mm) | Length | Per the tractor Beam | |
| Width | 2550 | ||
| Height (unload) | 2,250 | ||
| Side Logging Pillars system | U shape Log pillars holde system equipment with Turn Table for the Turning , with Sawteeths at the Cross Beam Holder which Pin Joint with the side pillars to keep the Openning Angle to adjust the loading quantity. | ||
| Side Pillars | Left | 150*150*500mm | |
| Right | 150*150*1000mm | ||
| Turn Table | 25 Grade for Pillar system rolling | ||
| Cab Protection Frame | Steel Pipes assemble to the Cab outside to protect the cab in the forest working | ||
| Trailer Linkage | Auto-Couple Hook Type | ||
3. Container Chassis Steel Structure And Trailer Components
| Trailer Main beam | Deep: 450 mm (17.7") Auto-welt Main Beam With High strength low alloy steel with 350 MPa yield hot-rolled I-beam (Q345) | ||
| Flatbed Trailer Floor | 1/8" (3mm) Thickness ASTM A572 grade 50 Checked Steel Plate Options: 1/5" ( 5mm) | ||
| Side Plat Rail | Standard : 1 layer of Removeable 2 ft (600mm ) Height corrugated
sheet Options: 1. 2 layers or 3 layers 2. Removeable Tarpaulin Frame Layer | ||
| Kingpin Upper coupler | 1/4” pick up plate with JOST 2” diameter square type king pin per SAE standard | ||
| Flatbed Front Bolster | ASTM A572 grade 50 steel U form channel with 7'' wide x 6'' high x 5/16 thick open section, 3/8'' top plate | ||
| Rear Bolster | ASTM A572 grade 50 steel U form channel with 7'' wide x 7'' high x 5/16 thick open section, 3/8'' top plate | ||
| Rear Bumper | 100x100mm (4” x 4” ) square tube step with taper “H” section vertical member | ||
| Bar is welded to uprights and main beam. | |||
| Container Twist lock * | 8 Sets | 1x40ft Container and 2x20ft Container | |
4. Container Trailer Chassis Running Gears and Safty Valves
| Landing gear | Jost Or CIMC Brand 28T two speed telescopic manual landing gear | ||
| Crank handle is located on the driver’s side of the chassis. | |||
| Trailer Suspension | Mechanical tandem suspension with 3-leaf springs. Options: Air Spring Suspension , Bogie Suspension | ||
| Axles | 150mm (6") Square axles with 13T/15T/16T/20T capacity, 10 HUB
piloted hubs with outboard mounting cast steel drum (ABS Options)
Option : Disc Type Manufacturer: FUWA ,Options: BPW,SAF | ||
| Wheels | steel disc wheel, 10 holes ISO, ; Option: Aluminum alloy rim | ||
| Tires | Tubeless Tires ,
8.25R15,8.25R20,11.00R22.5,12.00R22.5,12.00R20,385/65R22.5,425/65R22.5
, Manufactuter: Double Coin, Triangle, Michelin, Firestone | ||
| Brake System | Dual line pneumatic brake, SAE hose and connector, WABCO relay emergency valve, OPTIONS: ABS brake system | ||
| T30/30 spring brake chambers, T30 brake chambers | |||
| 3/8” blue air tube for control and 3/8” red for supply, 40L air tanks | |||
| Electrical | OPTRONICS 12-volt LED lighting with Phillips mold seal wiring
harness, meet DOT and SAE standards. Receptacle::7 way socket SAE standard, China Wiring: Electric cable protected by PVC conduit on main frame | ||
| Painting | Electrophoretic spraying, that is, water-based coating, can be dissociated into a water-soluble film-forming material which can form a film in water, and swims to the opposite electrode in a direct current electric field, and precipitates on the surface of the object to form a coating film | ||
| MISC | GET standard marking, document holder, conspicuity tape, Steel or black rubber mud flaps | ||
| Option | Hubodometer, PSI tire inflation system | ||
5. Advantage of our Container Semi Trailers
CUSTOMIZED DESIGN
Based on full understanding and analysis about transportation
environment of various regions, refer to the millions of trailers’
producing experience and customer’s private condition, we design
all the trailers privately to different customers.
BEST STEEL CONSTRUCTION
Material choose the High strength low alloy steel with 350 mpa
yield strength is used for welded I-beam and 235 mpa in other
fabricated parts and the original ALCOA aluminum for the tanks and
dry logistic box.
AXLE SYSTEM
Hiigh quality axle from world brand of BPW, SAF TO China Famous
brand FUWA, L1 with strong bearing capacity from 9T to 20T and ABS
options to fit full demand of requirements.
SUSPENSION SYSTEM
High quality suspension from world brand of BPW, SAF TO China
Famous brand FUWA, L1, from Leaf-spring plate type, bogie type to
Air-Spring type and rubber type to fit different requirements of
the cargo delivery condition
TIRES AND RIMS
High quality tires from world brand of MICHELIN, BRIDGESTONE,
PIRELLI to China Brand DOUBLE COIN, TRI-ANGLE, Coupled with RIMS
from STEEL to ALUMINUM.
SAFETY CONTROL SYSTEM
World brand brake system WABCO Valves with ABS or EBS to keep the
trailers under control at any cases.
6. Related truck Trailer for Container Logistics
