Active Member
|
[China]
Address: NO 8001 JINGSHI EAST ROAD,JINAN CHINA
Contact name:Happle Hoo
GENERAL EAST CO.,LTD |
|
|
6x4 10000L asphalt distribution truck for road construction paving
| 6x4 10000L asphalt distribution truck for road construction paving | ||
| 6x4 10000L asphalt distribution truck for road construction paving, HOWO76 cabin,(air-condition, one bed); with WD615.69Sinotruk engine,336HP, with HW19710 transmission, with ZF steering(RHD), with12R22.5tires, etc. | ||
| SPECIFICATION | HOWO ZZ1257N4341W | |
| Dimension(L×W ×H)(unloaded) | 9260*2495*3650 | |
| Tank capacity (m3) | 10 | |
| Approaching angle/Departure angle(°) | 16/12 | |
| Overhang(front/rear) (mm) | 1500/2085 | |
| Wheel base (mm) | 4325+1350 | |
| Max speed(km/h) | 75 | |
| Curb weight(kg) | 14970 | |
| Loading Weight(kg) | 10000 | |
| Engine (Steyr technology, made in China) | Model | WD615.69,water-cooled,four strokes,6 cylinders in line with water cooling,turbocharged and inter-cooling, directly injection |
| Fuel type | Diesel | |
| Power, max(kw/rpm) | 247/2200(336HP) | |
| Emission | EURO 2 | |
| Fuel tanker capacity | 300 | |
| Transmission | Model | HW19710,10 forward&2 reverse |
| Brake system | Service brake | Dual circuit compressed air brake |
| Parking brake | spring energy, compressed air operating on rear wheels | |
| Steering system | Model | ZF8098 (LHD) |
| Front axle | Steering with double T-cross section beam HF7 | |
| Rear axle | Pressed axle housing, central double reduction with differential locks between axles and wheels | |
| Tyre | 12R22.5 | |
| Electrical system | Battery | 2X12V/165Ah |
| Alternator | 28V-1500kw | |
| Starter | 7.5Kw/24V | |
| Cab | HOWO76 Standard cab, all-steel forward control,55ºhydraulically tiltable to the front,2- arm windscreen wiper system with three speeds, laminated windscreen with casted-in radio aerial, hydraulically damped adjustable driver’s seat and rigid adjustable co-driver’s seat, with heating and ventilating system, outer sun visor, adjustable roof flap, with stereo radio/cassette recorder, safety belts and adjustable steering wheel, air horn, with 4-point support fully floating suspension and shock absorbers | |
| Steel Structure: Material:High strength low alloy steel with 350 MPa yield strength is used for welded I-beam and 235 MPa in other fabricated parts. | ||
| Refitting parts | ||
| 1, automatic hydraulic Sprayer with 6m width, Folded Design with 3 separate parts which can work separately or together, with a total of 34 uniformed spray nozzles, automatic control by PLC. | ||
| 2, Self-Equipped Hydraulic Motor Mixer to keep the pich still have the best liquidity. | ||
| 3, Italian original imported heaters, | ||
| 4, Self-Equipped heat transfer fuel tank and spare fuel tanks to bear the long time working capability. | ||
| 5, Equipped with Italian diesel engine, to ensure the best power supply. | ||
| Main features: | ||
| 1. Easy Assembling: All Equipment arranged on the Sub-chassis as a full assembly, can fit for all the Truck chassis. | ||
| 2. Long Self-working time: automatic diesel burner, equipped with 200 liters of large capacity diesel tank, can ensure long time of working power. | ||
| 3. High safety Effect: automatic diesel burner heating system, with chassis own DC 24 V and U-type return duct flue to ensure the most efficient heating temperature, and a higher level of safety efficient; | ||
| 4. Good insulation effect: 100 mm thickness of the high-density rock wool insulation layer, 100% filling. | ||
| 5. High working efficiency: high-powered diesel engine supply the best and continuously Power to self-heating gear pump to ensure all at high efficiency working condition. | ||
| 6. Good Spraying effect: folded sprayer system with 34 nozzles controlled by auto-PLC system, can adjust to fit all the spraying requirements. | ||
| 7. Washable filter: special designed suction filter for easy removing and cleaning | ||
| 8. High automation control system: a controller within the cab can control of spraying and pumps to let people no need to get offer to work. | ||
| 9. intelligent Pressure adjustment: With the PLC control regulator to adjust and control the spray pressure to keep the spraying amount at 0.3-3.6kg / m2 and Automatic adjust at different vehicle’s speed. | ||
