China • Yuanda Valve Group Co., Ltd. |
|
The valve can be used in the pipeline and equipment of corrosive
media for blocking, sealing and regulating the flow rate, fully
open position, the flow rate of the medium in the pipeline shall
not be greater than 5M /s
Type | DN | Size | |||||||
L | D | D1 | D2 | H1 | H2 | b-f | Z-Φd | ||
D343W-16P | 60 | 108 | 165 | 125 | 99 | 90 | 220 | 20-2 | 4-Φ18 |
75 | 112 | 185 | 145 | 118 | 100 | 230 | 20-2 | 4-Φ18 | |
85 | 114 | 200 | 160 | 132 | 110 | 237 | 20-2 | 8-Φ18 | |
108 | 127 | 220 | 180 | 156 | 120 | 245 | 22-2 | 8-Φ18 | |
130 | 140 | 250 | 210 | 184 | 135 | 283 | 22-2 | 8-Φ18 | |
158 | 140 | 280 | 240 | 210 | 155 | 312 | 24-2 | 8-Φ22 | |
206 | 152 | 335 | 295 | 265 | 211.5 | 350 | 24-2 | 12-Φ23 | |
256 | 165 | 405 | 355 | 320 | 248.5 | 400 | 26-2 | 12-Φ26 | |
304 | 178 | 460 | 410 | 375 | 284 | 438 | 28-2 | 12-Φ26 | |
354 | 190 | 520 | 470 | 435 | 315 | 499 | 30-2 | 16-Φ26 | |
404 | 216 | 580 | 525 | 480 | 346 | 527 | 32-2 | 16-Φ30 | |
454 | 222 | 640 | 585 | 548 | 377 | 554 | 34-2 | 20-Φ30 | |
506 | 229 | 715 | 650 | 609 | 417 | 602 | 36-4 | 20-Φ33 | |
606 | 267 | 840 | 770 | 720 | 487 | 655 | 38-5 | 20-Φ36 |
Part name | Material |
Body,Disc,Yoke,Gland,End cover | CF8 |
Valve shaft,Cylindrical pin | F304 |
Butterfly plate sealing ring | 304+XB450 |
Fasteners in body | 35/45 |
Other connecting bolts, nuts and washers | 201 |
· Nominal pressure: 1.0, 1.6 MPa
· Nominal diameter: DN50-DN600mm
· Applicable temperature and medium:
·The main material is stainless steel CF8, suitable temperature -29
~ 425℃, suitable medium: water, oil, steam and nitric acid
corrosive liquid.
· Design and manufacture: JB/T 8527 metal seal butterfly valve
· Structure length: GB/T 12221 metal valve structure length
· Connecting end: GB/T 9113 integral steel pipe flange
· Inspection and test: GB/T 13927 valve inspection and test
1. The valve adopts three eccentric structure, with the tighter
sealing function, the sealing performance is reliable.
2. Butterfly plate sealing ring adopts multi-layer plate
combination of flexible graphite and stainless steel plate, medium
corrosion resistance, erosion, maintenance free, long service life.
3. The sealing surface of the valve body is the body processing
technology, resistant to medium corrosion and erosion, maintenance
free, long service life.
4. High strength of butterfly plate, large flow area, small flow
resistance.
5, the valve shaft is sealed with flexible graphite packing, the
higher the medium pressure, the better the sealing. Wear of the
packing can be compensated by continuing to compress the packing
gland.
1. This product should be stored in a dry warehouse and is strictly
prohibited to be stored in the open air.
2. The medium flow direction should be consistent with the arrow
direction on the valve body when the valve is installed.
3. The pressure test should be carried out before installation, and
it can be installed after passing the test.
4. The pipe and valve cavity should be cleaned before installation.
5. The product shall not be subject to large external force after
installation.
6. The operating conditions shall meet the technical requirements
in the performance specifications.
7. Set the valve bracket if necessary.
8. Long-term storage, regular maintenance.